Which Furnace Replaces a Suburban SFV-35Q?

The situation

A customer needed to replace a Suburban SFV-35Q furnace and wanted to know which current model takes its place. Suburban no longer builds the SFV-35Q.

The short answer

The Suburban SF-35VHQ is the direct replacement. It supersedes the SFV-35Q, and ducting, wiring, and dimensions are all the same.

Why

The change is about mounting orientation, not capacity. The old SFV designation meant a vertical-mount unit, while VH in SF-35VHQ means the furnace installs horizontally or vertically. Suburban consolidated the separate orientation-specific part numbers into one dual-orientation unit, so a single model now covers what used to take two. You'll see the same pattern elsewhere in the line — the SF-42VHQ supersedes both the SF-42Q and the SFV-42Q.

Everything that matters for a swap carries over on the 35,000 BTU unit:

  • 35,000 BTU/h input, LP propane
  • 12V DC, 8 amp draw
  • 4 × 4" supply ducts, 55 sq in return air
  • 7.5" × 17" × 20", 29 lbs

No duct rework, no rewiring, no cabinet modification.

What to do

  1. Check your gas connection location before ordering. This is the one place people order the wrong unit. The SF-35VHQ is the Q variant, with gas on the right side — matching your SFV-35Q. If your furnace instead connects gas at the front, you have an F-series unit and want the SF-35VHFQ.
  2. Order the SF-35VHQ. It ships with vents, mounting screws, and the installation manual. An exterior access door is not included — if yours isn't reusable, you'll need one separately.
  3. Before replacing the whole furnace: if the symptom is failure to ignite rather than a dead blower, the culprit is often the igniter electrode. The 525051 electrode kit is the SF/SFV Q and FQ specific part, and the 525009 assembly covers a broader SF/SFV range. Both are a small fraction of a full furnace and worth ruling out first.
  4. Have a qualified RV technician handle the install and leak-test the gas connections afterward.

Still not sure?

Send us the full model number off your furnace data plate and tell us where the gas line connects, and we'll confirm the right unit before you order. Ask us here.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.