{"title":"Slide Out \u0026 Leveling Parts","description":"\u003cp\u003eChoose from a variety of BAL and Lippert motors ranging from step motors all the way to slide out motors. We also have a large selection of Lippert slide controllers as well as leveling controllers and harnesses.\u003c\/p\u003e\n\u003cp\u003eAll products are new unless specified as pull-offs from OEM manufacturing mistakes\/closures while never being sold to an actual customer.\u003c\/p\u003e\n\u003cp\u003eMotors may have been pre-greased.\u003c\/p\u003e","products":[{"product_id":"lippert-solera-venture-motorhome-awning-motor-373566-266149-lci-oem","title":"Lippert Solera Power Awning Motor | 373566 \/ 266149 | LCI OEM","description":"\u003cp\u003eRestore reliable awning operation to your Solera Power Awning with the \u003cstrong\u003eLippert \/ Solera Venture Motorhome Awning Motor (Part #373566 \/ #266149)\u003c\/strong\u003e. This genuine LCI\/Lippert OEM motor is the drive component that powers your Solera Power Awning's extension and retraction — engineered with universal fit across flat, pitched, and short Solera Power Awning assemblies. The right replacement when your existing motor has failed, become noisy, or stopped operating reliably.\u003c\/p\u003e\n\u003ch3\u003e⚠️ Genuine LCI\/Lippert OEM — NOT a Chinese Copy\u003c\/h3\u003e\n\u003cp\u003eOne thing worth being explicit about: this is a \u003cstrong\u003egenuine Lippert\/Solera motor\u003c\/strong\u003e — not a Chinese aftermarket copy. The RV parts market is unfortunately flooded with cheaper aftermarket replicas of OEM awning motors that often fail prematurely, don't drive properly, or damage your awning hardware over time. The 373566 \/ 266149 motors we sell are \u003cstrong\u003ereal LCI\/Lippert\/Solera units\u003c\/strong\u003e, pulled from genuine OEM Solera Power Awning assemblies. If your previous \"replacement\" motor failed quickly, the OEM vs aftermarket distinction is likely a meaningful factor.\u003c\/p\u003e\n\u003ch3\u003eAbout These Motors — New OEM, Pulled from Disassembled Display\/Mistake Units\u003c\/h3\u003e\n\u003cp\u003eThese motors are \u003cstrong\u003egenuine LCI\/Lippert units\u003c\/strong\u003e with an unusual sourcing path that translates to meaningful cost savings:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNever installed in customer-sold RVs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulled from disassembled slides\u003c\/strong\u003e that were OEM manufacturing mistakes\/factory display units\/closed plants\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM offloaded these units\u003c\/strong\u003e rather than sending them to customers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWe part those slides out\u003c\/strong\u003e for resale of the individual components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou get genuine OEM Solera\/Lippert factory quality at a price point typically below sourcing new-in-box motors directly from the supply chain.\u003c\/p\u003e\n\u003ch3\u003e⚠️ Possible Minor Wear \/ Discoloration\u003c\/h3\u003e\n\u003cp\u003eBecause these motors come from disassembled slides, the units may show \u003cstrong\u003eminor wear or discoloration\u003c\/strong\u003e on parts of the assembly. This is purely cosmetic and does NOT affect:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMotor performance or function\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMechanical operation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eService life\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting fit\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mechanical and electrical components are unaffected — only the visible cosmetic finish may show some wear. If your installation hides the motor from view (which is typical for most Solera Power Awning installations), this is a non-issue.\u003c\/p\u003e\n\u003ch3\u003eUniversal Solera Power Awning Fit\u003c\/h3\u003e\n\u003cp\u003eThe 373566 \/ 266149 motors are engineered for \u003cstrong\u003euniversal fit across most Solera Power Awning configurations\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFlat assemblies\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePitched assemblies\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShort assemblies\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThat cross-style compatibility means a single replacement motor SKU serves a wide range of Solera installations — simplifying both buyer decision-making and parts inventory.\u003c\/p\u003e\n\u003ch3\u003e⚠️ For Solera Power Awnings Built AFTER July 15, 2015\u003c\/h3\u003e\n\u003cp\u003eCritical date-based fitment: the 373566 is designed for Solera Power Awnings \u003cstrong\u003emanufactured AFTER July 15, 2015\u003c\/strong\u003e. If your awning was built \u003cstrong\u003eBEFORE\u003c\/strong\u003e that date, you'll need the \u003ca href=\"https:\/\/thervsurplus.com\/products\/solera-power-awning-motor-266149-pre-july-2015-dual-connectors\"\u003eSolera 266149 Awning Motor (Pre-July 2015)\u003c\/a\u003e instead — the dual-connector variant for older-build Solera Power Awnings.\u003c\/p\u003e\n\u003ch3\u003eCross-Reference Part Numbers\u003c\/h3\u003e\n\u003cp\u003eThis same Lippert\/Solera awning motor is referenced under multiple part numbers depending on the supplier or catalog generation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e373566\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e266149\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth numbers refer to the same motor. If your existing motor or supplier documentation shows either of these numbers, this is the matching replacement.\u003c\/p\u003e\n\u003ch3\u003ePower Drill Compatible — Manual Operation Backup\u003c\/h3\u003e\n\u003cp\u003eOne of the standout features of this motor: \u003cstrong\u003ecordless power drill compatibility for manual operation during power failures\u003c\/strong\u003e. If your RV's 12V system fails, the battery dies, or you encounter any other power issue with the awning extended, you can:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eEngage the motor with a standard cordless drill\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManually retract the awning\u003c\/strong\u003e to its closed position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManually extend\u003c\/strong\u003e if needed in unusual scenarios\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinue using your awning\u003c\/strong\u003e even when 12V power isn't available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor boondockers, off-grid travelers, or anyone who's experienced a dead battery with the awning extended, that power drill backup capability is genuinely meaningful. You're never stuck with an extended awning that you can't safely retract.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation\u003c\/h3\u003e\n\u003cp\u003eThe motor is designed with \u003cstrong\u003eminimal components and user-friendly engineering\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick motor replacement\u003c\/strong\u003e for experienced RV owners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal hassle\u003c\/strong\u003e compared to more complex drive system designs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect fit\u003c\/strong\u003e on compatible Solera installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat This Motor Does\u003c\/h3\u003e\n\u003cp\u003eThe drive motor is the powered component that automates Solera Power Awning operation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrives extension\u003c\/strong\u003e — opens the awning out from the RV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrives retraction\u003c\/strong\u003e — pulls the awning back to the closed position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProvides controlled motion\u003c\/strong\u003e rather than free-fall on retraction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllows one-touch operation\u003c\/strong\u003e from the awning's control interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Failure Symptoms\u003c\/h3\u003e\n\u003cp\u003eReasons to replace the Solera Power Awning motor include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAwning won't extend or retract\u003c\/strong\u003e when the switch is activated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor runs but awning doesn't move\u003c\/strong\u003e — internal mechanism failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnusual grinding, squealing, or rumbling noises\u003c\/strong\u003e during operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow, labored, or strained motion\u003c\/strong\u003e during extension\/retraction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor seizes\u003c\/strong\u003e — completely stops working\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent operation\u003c\/strong\u003e — works sometimes, doesn't other times\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAwning binds or sticks\u003c\/strong\u003e mid-cycle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore assuming the motor has failed, rule out simpler issues — switch operation, wiring connections, battery voltage, fuses, or mechanical binding in the awning hardware. These can mimic motor failure symptoms.\u003c\/p\u003e\n\u003ch3\u003e⚠️ Professional Installation Recommended\u003c\/h3\u003e\n\u003cp\u003eAwning drive motor replacement involves \u003cstrong\u003eworking with high-tension awning components and the awning's 12V electrical system\u003c\/strong\u003e. Awnings under tension can cause injury during disassembly. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e with experience working on tensioned awning assemblies.\u003c\/p\u003e\n\u003ch3\u003e1-Year RV Surplus Parts Warranty\u003c\/h3\u003e\n\u003cp\u003eThe 373566 \/ 266149 motors are backed by \u003cstrong\u003eour 1-year parts warranty with The RV Surplus\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eGenuine LCI \/ Lippert \/ Solera OEM\u003c\/h3\u003e\n\u003cp\u003eAs a genuine LCI (Lippert Components Inc.) factory replacement motor, the 373566 \/ 266149 delivers OEM-grade engineering and quality. Lippert \/ Solera is the proven manufacturer of Solera Power Awnings — these are the same motors that originally shipped in those awning assemblies.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine LCI \/ Lippert \/ Solera OEM\u003c\/strong\u003e Power Awning motor — NOT a Chinese aftermarket copy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal fit\u003c\/strong\u003e across flat, pitched, and short Solera Power Awning assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower drill compatible\u003c\/strong\u003e — manual extension\/retraction during power failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy installation\u003c\/strong\u003e with minimal components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimarily for Solera Power Awnings manufactured AFTER July 15, 2015\u003c\/strong\u003e (visual identification rule applies)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulled from disassembled OEM display\/mistake slides\u003c\/strong\u003e — never sold to a customer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMay show minor cosmetic wear\/discoloration\u003c\/strong\u003e — does not affect function or service life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-references:\u003c\/strong\u003e 373566, 266149\u003c\/li\u003e\n\u003cli\u003eBacked by 1-year RV Surplus parts warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Lippert \/ Solera (LCI)\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 373566, 266149\u003c\/li\u003e\n\u003cli\u003eType: Solera Power Awning Drive Motor\u003c\/li\u003e\n\u003cli\u003eCompatible Awning Styles: Flat, pitched, and short Solera Power Awning assemblies\u003c\/li\u003e\n\u003cli\u003eCompatible Awning Build Date: Primarily Solera Power Awnings built AFTER July 15, 2015 (visual confirmation recommended)\u003c\/li\u003e\n\u003cli\u003ePower Drill Compatible: Yes (manual operation backup)\u003c\/li\u003e\n\u003cli\u003eCondition: Genuine OEM (pulled from disassembled OEM display\/mistake slides; may show minor wear\/discoloration)\u003c\/li\u003e\n\u003cli\u003eWarranty: 1-year RV Surplus parts warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":44576355909935,"sku":"","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/products\/fdfjfoindhfhhcfgdlgnlflmjiojkfnofhkeyEvG__31419.jpg?v=1677613127"},{"product_id":"ig-42-10mm-schwintek-lippert-300-1-236575-slide-out-motor","title":"Lippert Schwintek Slide-Out Motor | 236575 | IG-42 10mm | 300:1","description":"\u003cp\u003eRestore reliable slide-out operation to your Lippert Schwintek In-Wall RV slide-out system with the \u003cstrong\u003eLippert OEM Schwintek 300:1 IG-42 10mm Slide-Out Motor (Part #236575)\u003c\/strong\u003e. This genuine LCI\/Lippert OEM motor is the drive component that powers your Schwintek slide-out's extension and retraction — engineered for direct DIY replacement on the standard-torque Schwintek architecture. The right replacement when your existing motor has failed, become noisy, or stopped operating reliably.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Genuine LCI\/Lippert OEM — NOT a Chinese Copy\u003c\/h3\u003e\n\u003cp\u003eOne thing worth being explicit about: this is a \u003cstrong\u003egenuine Lippert motor with an LCI serial number\u003c\/strong\u003e — not a Chinese aftermarket copy. The RV parts market is unfortunately flooded with cheap replicas of OEM Schwintek slide-out motors that often fail prematurely, don't drive properly, or damage your slide-out hardware over time. The 236575 motors we sell are \u003cstrong\u003ereal LCI\/Lippert units\u003c\/strong\u003e. If your previous \"replacement\" motor failed quickly, the OEM vs aftermarket distinction is likely a meaningful factor.\u003c\/p\u003e\n\u003ch3\u003eNeed the 5mm Shaft Variant?\u003c\/h3\u003e\n\u003cp\u003eFor older In-Wall installations that use a \u003cstrong\u003e5mm output shaft motor\u003c\/strong\u003e, order the \u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-in-wall%C2%AE-ig-42-motor-assembly-for-rv-slide-outs-5mm-240015\"\u003eLippert 240015 In-Wall IG-42GM 5mm Motor\u003c\/a\u003e instead. Verify shaft size before ordering — 5mm and 10mm motors are NOT interchangeable.\u003c\/p\u003e\n\u003ch3\u003e⚠️ Possible Minor Discoloration on Cylinder\u003c\/h3\u003e\n\u003cp\u003eThese motors may show \u003cstrong\u003eminor discoloration on part of the cylinder\u003c\/strong\u003e. This is purely cosmetic and does NOT affect:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eMotor performance or function\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMechanical operation\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eService life\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMounting fit\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mechanical and electrical components are unaffected — only visible cosmetic finish may show some wear. Since the motor is hidden inside the wall in typical Schwintek installations, cosmetic appearance is a non-issue for most buyers.\u003c\/p\u003e\n\n\u003ch3\u003e300:1 Gear Ratio — Standard Torque\u003c\/h3\u003e\n\u003cp\u003eThe 236575 features a \u003cstrong\u003e300:1 gear ratio\u003c\/strong\u003e — the standard torque output for Schwintek In-Wall slide-out applications. This is the right motor for the majority of Schwintek slide-out installations on the road today, sized appropriately for typical slide-out weights and operational loads.\u003c\/p\u003e\n\n\u003ch3\u003eNeed More Torque? See the 500:1 High Torque Sibling\u003c\/h3\u003e\n\u003cp\u003eIf your slide-out is heavier or requires more torque than the standard 300:1 motor provides — for example, larger slide-outs, heavier furniture-loaded slides, or installations where binding has caused the standard motor to struggle — see the higher-torque variant:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-schwintek-motor-in-wall-high-torque-287298-500-1\"\u003eLippert Schwintek In-Wall High Torque Motor — 500:1 (Part #287298)\u003c\/a\u003e — same physical fitment but with a higher gear ratio for more torque output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMatch the motor's torque rating to your slide-out's weight and operational requirements. If you're not sure which torque rating you need, verify against your original motor's part number — slide-out manufacturers specify the appropriate motor at design time, and replacements should match.\u003c\/p\u003e\n\n\u003ch3\u003eIG-42 \/ 10mm Shaft — Schwintek In-Wall Standard\u003c\/h3\u003e\n\u003cp\u003eThe 236575 features:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIG-42 motor designation\u003c\/strong\u003e — the standard Schwintek In-Wall motor architecture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10mm shaft diameter\u003c\/strong\u003e — direct fit on Schwintek In-Wall slide-out drive systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExact-match component\u003c\/strong\u003e — drop-in fit on compatible Schwintek installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFor Lippert Schwintek In-Wall Slide-Out Systems\u003c\/h3\u003e\n\u003cp\u003eThe 236575 is specifically designed for \u003cstrong\u003eLippert Schwintek In-Wall slide-out systems\u003c\/strong\u003e. Schwintek In-Wall is the slide-out architecture where the drive motors and rack-and-pinion mechanism are concealed inside the slide-out walls — distinct from other Lippert slide-out architectures (such as Full Wall slide-out controllers like the \u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-368828-slide-out-cntrl-module-replaces-full-wall-kit-386185-140-1249s\"\u003e368828\u003c\/a\u003e, which serves a different system entirely).\u003c\/p\u003e\n\u003cp\u003eVerify your slide-out architecture before ordering — Lippert produces multiple slide-out systems, and motors are not interchangeable across the different architectures.\u003c\/p\u003e\n\n\u003ch3\u003eEasy DIY Installation\u003c\/h3\u003e\n\u003cp\u003eThe 236575 is engineered for \u003cstrong\u003estraightforward DIY replacement\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExact-match drop-in replacement\u003c\/strong\u003e for OEM Schwintek motors\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard mounting\u003c\/strong\u003e — no architectural modifications needed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMost DIY-comfortable RV owners\u003c\/strong\u003e can complete the swap with basic tools\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect plug-and-play electrical\u003c\/strong\u003e connection on standard Schwintek wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat This Motor Does\u003c\/h3\u003e\n\u003cp\u003eThe drive motor is the powered component that operates Schwintek In-Wall slide-outs:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrives slide extension\u003c\/strong\u003e — opens the slide-out from the wall\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrives slide retraction\u003c\/strong\u003e — pulls the slide back to the closed position\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProvides controlled motion\u003c\/strong\u003e via the integrated gear reduction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAllows one-touch operation\u003c\/strong\u003e from the slide-out control switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCommon Failure Symptoms\u003c\/h3\u003e\n\u003cp\u003eReasons to replace the Schwintek slide-out motor include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlide won't extend or retract\u003c\/strong\u003e when the switch is activated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor runs but slide doesn't move\u003c\/strong\u003e — internal gear failure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnusual grinding, squealing, or rumbling noises\u003c\/strong\u003e during operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlow, labored, or strained motion\u003c\/strong\u003e during extension\/retraction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor seizes\u003c\/strong\u003e — completely stops working\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntermittent operation\u003c\/strong\u003e — works sometimes, doesn't other times\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor overheats\u003c\/strong\u003e during operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlide binds or sticks\u003c\/strong\u003e mid-cycle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore assuming the motor has failed, rule out simpler issues — switch operation, wiring connections, control module function, battery voltage, fuses, or mechanical binding in the slide-out hardware. These can mimic motor failure symptoms. Our \u003ca href=\"https:\/\/thervsurplus.com\/blogs\/news\/rv-slide-out-moves-slowly-or-stuck\"\u003eRV Slide-Out Moves Slowly or Stuck troubleshooting guide\u003c\/a\u003e walks through the typical diagnostic path.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Recommended for Complex Cases\u003c\/h3\u003e\n\u003cp\u003eWhile the 236575 is engineered as a DIY-friendly replacement, slide-out motor replacement involves \u003cstrong\u003eworking with the slide-out mechanism, 12V DC electrical wiring, and potentially the slide rack-and-pinion drive system\u003c\/strong\u003e. For first-time installations or unfamiliar slide-out configurations, a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e can ensure proper alignment, electrical termination, and operational verification. After installation, verify smooth extension\/retraction across the full slide travel.\u003c\/p\u003e\n\n\u003ch3\u003e1-Year RV Surplus Warranty\u003c\/h3\u003e\n\u003cp\u003eThe 236575 is backed by our \u003cstrong\u003e1-year warranty with The RV Surplus\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eGenuine LCI \/ Lippert OEM\u003c\/h3\u003e\n\u003cp\u003eAs a genuine LCI (Lippert Components Inc.) factory replacement motor with verifiable LCI serial number, the 236575 delivers OEM-grade engineering and quality. Lippert is the proven manufacturer of Schwintek slide-out systems — these are the same motors that originally shipped in those slide-out assemblies.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine LCI \/ Lippert OEM\u003c\/strong\u003e Schwintek In-Wall slide-out motor with verifiable LCI serial number\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eNOT a Chinese aftermarket copy\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e300:1 gear ratio\u003c\/strong\u003e — standard torque for typical Schwintek slide-outs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIG-42 \/ 10mm shaft\u003c\/strong\u003e — Schwintek In-Wall standard architecture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExact-match component\u003c\/strong\u003e — direct drop-in replacement\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eEasy DIY installation\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eHigh torque output\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eSmooth and quiet operation\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigher-torque sibling available:\u003c\/strong\u003e 500:1 variant (Part #287298) for heavier slide-outs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMay show minor cosmetic cylinder discoloration\u003c\/strong\u003e — does not affect function or service life\u003c\/li\u003e\n  \u003cli\u003eBacked by 1-year RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Lippert (LCI)\u003c\/li\u003e\n  \u003cli\u003ePart Number: 236575\u003c\/li\u003e\n  \u003cli\u003eMotor Designation: IG-42\u003c\/li\u003e\n  \u003cli\u003eType: Schwintek In-Wall Slide-Out Motor\u003c\/li\u003e\n  \u003cli\u003eGear Ratio: 300:1 (standard torque)\u003c\/li\u003e\n  \u003cli\u003eShaft Diameter: 10mm\u003c\/li\u003e\n  \u003cli\u003eCompatible System: Lippert Schwintek In-Wall slide-out architecture\u003c\/li\u003e\n  \u003cli\u003eNOT Compatible With: Other Lippert slide-out architectures (e.g., Full Wall slide-outs use different motors and controllers)\u003c\/li\u003e\n  \u003cli\u003eInstallation: DIY-friendly drop-in replacement\u003c\/li\u003e\n  \u003cli\u003eCondition: Genuine LCI OEM (may show minor cosmetic cylinder discoloration)\u003c\/li\u003e\n  \u003cli\u003eHigher-Torque Sibling: Lippert Schwintek In-Wall 500:1 High Torque Motor (Part #287298)\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":44576502186287,"sku":"","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/products\/61Crxn0ws3L._AC_SL1500.jpg?v=1677614081"},{"product_id":"module","title":"HappiJac Wireless Jack Control Kit | 742318 | 25 Amp | Camper Jacks","description":"\u003cp\u003eRestore wireless control to your HappiJac electric truck camper jack system with the \u003cstrong\u003eHappiJac 742318 Wireless Jack Control (25 Amp)\u003c\/strong\u003e by Lippert. Complete kit includes replacement circuit board, wireless remote transmitter, and connecting wire — everything needed to restore extend\/retract operation of your motorized camper jacks.\u003c\/p\u003e\n\n\u003ch3\u003eFor HappiJac Electric Jack Systems\u003c\/h3\u003e\n\u003cp\u003eReplaces the circuit board and wireless remote for the HappiJac electric truck camper jack kits:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eLC736514-ELKIT\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLC736515-ELKIT\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExisting jack wiring harnesses plug directly into the new board for continued electric operation.\u003c\/p\u003e\n\n\u003ch3\u003eComplete Kit — What's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eClutchless current controller circuit board\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHappiJac wireless remote transmitter\u003c\/strong\u003e (part #723915)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHappiJac wireless remote receiver\u003c\/strong\u003e (part #723914)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoiled cable\u003c\/strong\u003e — connects controller to board\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e25 Amp Rating\u003c\/h3\u003e\n\u003cp\u003eRated for \u003cstrong\u003e25 amp\u003c\/strong\u003e operation — matches HappiJac electric jack current draw specifications.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eCircuit board \u003cstrong\u003emounts vertically inside your camper, near the main electrical panel\u003c\/strong\u003e. Wire harnesses from your existing jacks plug directly into the board for extend\/retract operation.\u003c\/p\u003e\n\n\u003ch3\u003eMultiple Part Number References\u003c\/h3\u003e\n\u003cp\u003eThis same HappiJac control kit is referenced under several identifiers:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e742318\u003c\/strong\u003e (current SKU)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e733513\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e24092\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupersedes:\u003c\/strong\u003e 290912\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMade in the USA\u003c\/h3\u003e\n\u003cp\u003eManufactured in the USA — meaningful domestic-sourcing credential.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Recommended\u003c\/h3\u003e\n\u003cp\u003eCamper jack control installation involves \u003cstrong\u003eworking with 12V DC electrical wiring and current-carrying components\u003c\/strong\u003e. Installation should be performed by a \u003cstrong\u003equalified RV or truck camper service technician\u003c\/strong\u003e. Always verify safe jack operation and proper current draw after installation.\u003c\/p\u003e\n\n\u003ch3\u003e1-Year RV Surplus Warranty\u003c\/h3\u003e\n\u003cp\u003eBacked by our \u003cstrong\u003e1-year warranty with The RV Surplus\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine HappiJac (Lippert)\u003c\/strong\u003e wireless jack control kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e25 Amp\u003c\/strong\u003e rating\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete kit\u003c\/strong\u003e — board, wireless transmitter, receiver, and coiled cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor HappiJac electric truck camper jack systems\u003c\/strong\u003e (LC736514-ELKIT, LC736515-ELKIT)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVertical mount\u003c\/strong\u003e near main electrical panel\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross-references:\u003c\/strong\u003e 742318, 733513, 24092; supersedes 290912\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 848150059260\u003c\/li\u003e\n  \u003cli\u003eBacked by 1-year RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) Clutchless current controller circuit board\u003c\/li\u003e\n  \u003cli\u003e(1) Wireless remote transmitter (HappiJac 723915)\u003c\/li\u003e\n  \u003cli\u003e(1) Wireless remote receiver (HappiJac 723914)\u003c\/li\u003e\n  \u003cli\u003e(1) Coiled cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: HappiJac (Lippert)\u003c\/li\u003e\n  \u003cli\u003ePart Number: 742318\u003c\/li\u003e\n  \u003cli\u003eCross-References: 733513, 24092\u003c\/li\u003e\n  \u003cli\u003eSupersedes: 290912\u003c\/li\u003e\n  \u003cli\u003eUPC: 848150059260\u003c\/li\u003e\n  \u003cli\u003eType: Wireless Jack Control Kit (Clutchless Current Controller + Remote)\u003c\/li\u003e\n  \u003cli\u003eApplication: HappiJac electric truck camper jack systems (LC736514-ELKIT, LC736515-ELKIT)\u003c\/li\u003e\n  \u003cli\u003eAmperage: 25 Amp\u003c\/li\u003e\n  \u003cli\u003eIncludes: Circuit board, wireless remote transmitter (723915), wireless remote receiver (723914), coiled cable\u003c\/li\u003e\n  \u003cli\u003eMounting: Vertical, near main electrical panel\u003c\/li\u003e\n  \u003cli\u003eCountry of Origin: USA\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":44812643696943,"sku":"","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/742318_HappiJac_HappiJacWirelessJackControlwithCoiledCable25Amp742318_TruckCampe_0_1_2.webp?v=1761656600"},{"product_id":"lippert-5th-wheel-landing-gear-motor-141893-high-speed-5-000-lb","title":"Lippert 5th Wheel Landing Gear Motor | 141893 | High-Speed | 5,000 lb","description":"\u003cp\u003eRestore high-speed landing gear operation to your 5th wheel with the \u003cstrong\u003eLippert 141893 High-Speed 5th Wheel Landing Gear Motor\u003c\/strong\u003e. Genuine OEM Lippert replacement Tuson motor for powered 5th wheel landing gear systems — 5,000 lb capacity, direct-fit installation, no assembly required.\u003c\/p\u003e\n\n\u003ch3\u003eFor Lippert High-Speed 5th Wheel Landing Gear\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReplaces the Tuson high-speed motor\u003c\/strong\u003e on powered 5th wheel landing gear\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eCompatible with almost all Lippert electric landing gear assemblies\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e5,000 lb capacity\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMotor Only — Blunt-Cut Wire Leads\u003c\/h3\u003e\n\u003cp\u003eThis is the \u003cstrong\u003emotor only\u003c\/strong\u003e with blunt-cut wire leads. Complete landing gear system NOT included — this is a repair-scope replacement for buyers whose existing landing gear motor has failed.\u003c\/p\u003e\n\n\u003ch3\u003eEasy Installation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eNo assembly required\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eDirect-fit replacement\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMade in China\u003c\/h3\u003e\n\n\u003ch3\u003eUPC: 848150011190\u003c\/h3\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Recommended\u003c\/h3\u003e\n\u003cp\u003eLanding gear motor replacement involves working with 12V DC electrical and structural landing gear components. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e with experience on Lippert landing gear systems. Always verify safe operation across the full extension\/retraction range after installation.\u003c\/p\u003e\n\n\u003ch3\u003e1-Year Warranty\u003c\/h3\u003e\n\n\u003ch3\u003eGenuine Lippert OEM\u003c\/h3\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Lippert OEM\u003c\/strong\u003e high-speed 5th wheel landing gear motor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 141893\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e5,000 lb capacity\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReplaces Tuson high-speed motor\u003c\/strong\u003e on powered 5th wheel landing gear\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eCompatible with almost all Lippert electric landing gear assemblies\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor only\u003c\/strong\u003e — blunt-cut wire leads (complete landing gear NOT included)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eNo assembly required\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003eUPC: 848150011190\u003c\/li\u003e\n  \u003cli\u003eBacked by 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Lippert\u003c\/li\u003e\n  \u003cli\u003ePart Number \/ SKU: 141893\u003c\/li\u003e\n  \u003cli\u003eUPC: 848150011190\u003c\/li\u003e\n  \u003cli\u003eType: 5th Wheel Landing Gear Motor (High-Speed)\u003c\/li\u003e\n  \u003cli\u003eJack Type: Landing Gear\u003c\/li\u003e\n  \u003cli\u003eCapacity: 5,000 lbs\u003c\/li\u003e\n  \u003cli\u003eCompatible With: Lippert electric landing gear assemblies (most); replaces Tuson high-speed motor\u003c\/li\u003e\n  \u003cli\u003eIncludes: Motor only with blunt-cut wire leads (no complete landing gear)\u003c\/li\u003e\n  \u003cli\u003eOuter Diameter: 0.6875\"\u003c\/li\u003e\n  \u003cli\u003eCountry of Origin: China\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":47028149518639,"sku":"","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/EA475DE5-D850-48D6-A75A-768BB055AD6C.jpg?v=1693834624"},{"product_id":"irvc1-fr1-touch-control-panel-rv-system-management-rsb68-rsb66-t35","title":"iRV Touch Control Panel | IRVC1-FR1 | Forest River | RSB66\/68\/T35","description":"\u003cp\u003eReplace the touch control panel on your Forest River RV's iRV system with the \u003cstrong\u003eIRVC1-FR1 iRV Touch Control Panel\u003c\/strong\u003e. Direct replacement panel for RV systems that use the iRV RSB66, RSB68, or T35 control base — mostly installed in Forest River units in the last decade.\u003c\/p\u003e\n\n\u003ch3\u003eFor Forest River iRV System Installations\u003c\/h3\u003e\n\u003cp\u003eThese touch control panels work in conjunction with:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eiRV RSB66\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eiRV RSB68\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eiRV T35\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003eRelated iRV control base units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMostly used in \u003cstrong\u003eForest River units in the past 10 years\u003c\/strong\u003e. Uses \u003cstrong\u003eEthernet connection\u003c\/strong\u003e to communicate with the iRV control base.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ RSB68 Base Units — Sold Out Everywhere\u003c\/h3\u003e\n\u003cp\u003eIf you also need the \u003cstrong\u003eRSB68 base unit\u003c\/strong\u003e, we are \u003cstrong\u003esold out\u003c\/strong\u003e — and so is the market as a whole. You'll need to contact the \u003cstrong\u003eForest River parts department directly\u003c\/strong\u003e to source one. This IRVC1-FR1 panel is for buyers whose RSB68 base is still functional but the touch panel itself has failed.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Manual\u003c\/h3\u003e\n\u003cp\u003eReference manual available at: \u003ca href=\"https:\/\/manuals.plus\/estone-technology\/irvc1-control-panel-manual\" target=\"_blank\" rel=\"noopener\"\u003eEstone Technology IRVC1 Control Panel Manual\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Recommended\u003c\/h3\u003e\n\u003cp\u003eInvolves Ethernet networking, 12V DC electrical wiring, and iRV system integration. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e familiar with iRV control architecture.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIRVC1-FR1\u003c\/strong\u003e iRV touch control panel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReplacement panel\u003c\/strong\u003e for RV system management\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible with iRV RSB66, RSB68, T35\u003c\/strong\u003e control bases\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEthernet connection\u003c\/strong\u003e to control base\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUsed mostly in Forest River units\u003c\/strong\u003e from the past 10 years\u003c\/li\u003e\n  \u003cli\u003eRSB68 base sold out — contact Forest River parts if base replacement also needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eModel: IRVC1-FR1\u003c\/li\u003e\n  \u003cli\u003eType: iRV Touch Control Panel (RV System Management)\u003c\/li\u003e\n  \u003cli\u003eCompatible Bases: iRV RSB66, RSB68, T35 (and related)\u003c\/li\u003e\n  \u003cli\u003eConnection: Ethernet\u003c\/li\u003e\n  \u003cli\u003ePrimary Application: Forest River RVs (last 10 years)\u003c\/li\u003e\n  \u003cli\u003eNote: RSB68 base sold out market-wide — contact Forest River parts department\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iRV","offers":[{"title":"Default Title","offer_id":49926302073135,"sku":"","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/85E6734A-F684-4457-9710-24A6B5F46FEA.png?v=1733328566"},{"product_id":"lippert-in-wall-slide-out-motor-with-brake-364262-new-oem-slimrack-n-wall","title":"Lippert SlimRack n-Wall Slide-Out Motor | 364262 | 42mm | With Brake","description":"\u003cp\u003eRestore reliable slide-out operation to your Lippert SlimRack n-Wall slide-out system with the \u003cstrong\u003eLippert 364262 SlimRack n-Wall Slide-Out Motor with Brake (Supersedes 1510000227, 42mm)\u003c\/strong\u003e. Genuine Lippert OEM motor with integrated brake for secure slide-out operation. Brand new from OEM manufacturer excess inventory auction.\u003c\/p\u003e\n\n\u003ch3\u003eFor Lippert SlimRack n-Wall Slide-Out Systems\u003c\/h3\u003e\n\u003cp\u003eCompatible with most Lippert \u003cstrong\u003eSlimRack n-Wall slide-out systems\u003c\/strong\u003e. The SlimRack n-Wall architecture is distinct from other Lippert slide-out systems (Full Wall, Schwintek In-Wall, Through-Frame) — verify your slide-out architecture before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eCross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e364262\u003c\/strong\u003e (current)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1510000227\u003c\/strong\u003e (old part number)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIntegrated Brake\u003c\/h3\u003e\n\u003cp\u003eFeatures an \u003cstrong\u003eintegrated brake\u003c\/strong\u003e for secure slide-out positioning:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHolds slide position\u003c\/strong\u003e when motor is not powered\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrevents unwanted movement\u003c\/strong\u003e from vibration or gravity\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMore secure operation\u003c\/strong\u003e vs motors without integrated braking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMotor Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 42mm\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMid torque output\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact design\u003c\/strong\u003e for easy installation\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLow power consumption\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRobust construction\u003c\/strong\u003e for long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBrand New OEM — From Manufacturer Excess Inventory\u003c\/h3\u003e\n\u003cp\u003eGenuine Lippert OEM motor sourced from \u003cstrong\u003eOEM manufacturer excess inventory auction\u003c\/strong\u003e. Factory-new condition at meaningful cost savings vs sourcing new-in-box direct from Lippert.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Required\u003c\/h3\u003e\n\u003cp\u003eSlide-out motor replacement involves 12V DC electrical wiring and slide-out mechanism integration. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e. Always verify smooth slide operation across the full extension\/retraction range after installation.\u003c\/p\u003e\n\n\u003ch3\u003e1-Year RV Surplus Warranty\u003c\/h3\u003e\n\n\u003ch3\u003eGenuine Lippert OEM\u003c\/h3\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Lippert OEM\u003c\/strong\u003e SlimRack n-Wall slide-out motor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 364262 (supersedes 1510000227)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e42mm diameter\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMid torque\u003c\/strong\u003e output\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated brake\u003c\/strong\u003e for secure positioning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact design\u003c\/strong\u003e — easy installation\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLow power consumption\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor Lippert SlimRack n-Wall\u003c\/strong\u003e slide-out systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand new\u003c\/strong\u003e from OEM manufacturer excess inventory\u003c\/li\u003e\n  \u003cli\u003eBacked by 1-year RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Lippert (LCI)\u003c\/li\u003e\n  \u003cli\u003ePart Number: 364262\u003c\/li\u003e\n  \u003cli\u003eSupersedes: 1510000227\u003c\/li\u003e\n  \u003cli\u003eType: SlimRack n-Wall Slide-Out Motor with Brake\u003c\/li\u003e\n  \u003cli\u003eDiameter: 42mm\u003c\/li\u003e\n  \u003cli\u003eTorque: Mid torque\u003c\/li\u003e\n  \u003cli\u003eIntegrated Brake: Yes\u003c\/li\u003e\n  \u003cli\u003eCompatible System: Lippert SlimRack n-Wall slide-out architecture\u003c\/li\u003e\n  \u003cli\u003eNOT Compatible With: Other Lippert slide-out architectures (Full Wall, Schwintek In-Wall, Through-Frame)\u003c\/li\u003e\n  \u003cli\u003eCondition: Brand new (from OEM manufacturer excess inventory auction)\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":50997552546095,"sku":"","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/s-l1600_43.webp?v=1739043558"},{"product_id":"bal-rv-products-adnik-225008-slide-out-motor-and-gearbox-assembly","title":"BAL Slide-Out Motor + Gearbox Assembly | 225008 | High Torque | 12V","description":"\u003cp\u003eRestore reliable slide-out operation to your BAL cable slide-out system with the \u003cstrong\u003eBAL RV Products 225008 Slide-Out Motor and Gearbox Assembly (High-Torque)\u003c\/strong\u003e. Genuine BAL OEM motor and gearbox pre-greased and ready for installation. The high-torque variant for heavier or higher-load slide-out applications.\u003c\/p\u003e\n\n\u003ch3\u003ePrefer Standard Torque Instead?\u003c\/h3\u003e\n\u003cp\u003eIf your slide-out is a standard weight installation that originally used the standard-torque motor, see the \u003ca href=\"https:\/\/thervsurplus.com\/products\/bal-rv-products-adnik-225007-slide-out-motor-and-gearbox-assembly-new\"\u003eBAL 225007 Standard-Torque Slide-Out Motor and Gearbox Assembly\u003c\/a\u003e — same architecture, standard torque output. Match the motor's torque rating to your original slide-out specification.\u003c\/p\u003e\n\u003ch3\u003eFor BAL Cable Slide-Out Systems\u003c\/h3\u003e\n\u003cp\u003eDesigned specifically for the \u003cstrong\u003eBAL cable slide-out system\u003c\/strong\u003e. Not interchangeable with other slide-out architectures (Lippert Full Wall, Schwintek, Through-Frame, SlimRack n-Wall, or other manufacturers' systems).\u003c\/p\u003e\n\n\u003ch3\u003eCross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e225008\u003c\/strong\u003e (set\/assembly)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e21900002\u003c\/strong\u003e (alternate set number)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eR25075\u003c\/strong\u003e (motor component)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eR25076\u003c\/strong\u003e (gearbox component)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eItem 71.5185\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e12V DC Operation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eQuiet but powerful motor\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLong-lasting\u003c\/strong\u003e construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePre-Greased for Installation\u003c\/h3\u003e\n\u003cp\u003eNew units ship in manufacturer bags — \u003cstrong\u003epre-greased\u003c\/strong\u003e and ready for installation.\u003c\/p\u003e\n\n\u003ch3\u003eEasy Installation\u003c\/h3\u003e\n\u003cp\u003eDesigned for straightforward DIY installation with basic RV mechanical familiarity.\u003c\/p\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e16\" × 11.7\" × 5.2\"\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Recommended\u003c\/h3\u003e\n\u003cp\u003eInvolves 12V DC electrical wiring and integration with the BAL cable slide-out mechanism. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e unless you're comfortable with slide-out mechanism service.\u003c\/p\u003e\n\n\u003ch3\u003e1-Year Manufacturer Warranty\u003c\/h3\u003e\n\n\u003ch3\u003eGenuine BAL \/ Adnik OEM\u003c\/h3\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine BAL RV Products (Adnik) OEM\u003c\/strong\u003e slide-out motor + gearbox assembly\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-torque variant\u003c\/strong\u003e (225007 is the standard-torque sibling)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eFor BAL cable slide-out systems\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e12V DC\u003c\/strong\u003e operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuiet but powerful\u003c\/strong\u003e motor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-greased\u003c\/strong\u003e — ready for installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross-references:\u003c\/strong\u003e 225008, 21900002, R25075 (motor), R25076 (gearbox), 71.5185\u003c\/li\u003e\n  \u003cli\u003eDimensions: 16\" × 11.7\" × 5.2\"\u003c\/li\u003e\n  \u003cli\u003eShips new in manufacturer bag\u003c\/li\u003e\n  \u003cli\u003eBacked by 1-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: BAL RV Products (Adnik)\u003c\/li\u003e\n  \u003cli\u003ePart Numbers (Assembly): 225008, 21900002\u003c\/li\u003e\n  \u003cli\u003ePart Number (Motor): R25075\u003c\/li\u003e\n  \u003cli\u003ePart Number (Gearbox): R25076\u003c\/li\u003e\n  \u003cli\u003eItem Number: 71.5185\u003c\/li\u003e\n  \u003cli\u003eType: Slide-Out Motor and Gearbox Assembly (High-Torque)\u003c\/li\u003e\n  \u003cli\u003eTorque Variant: High-Torque\u003c\/li\u003e\n  \u003cli\u003eStandard-Torque Sibling: BAL 225007\u003c\/li\u003e\n  \u003cli\u003eCompatible System: BAL cable slide-out system\u003c\/li\u003e\n  \u003cli\u003eVoltage: 12V DC\u003c\/li\u003e\n  \u003cli\u003eDimensions: 16\" × 11.7\" × 5.2\"\u003c\/li\u003e\n  \u003cli\u003eCondition: New in manufacturer bag (pre-greased)\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BAL","offers":[{"title":"Default Title","offer_id":51059411845423,"sku":"","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/81i597Y8JFL._AC_SL1500.jpg?v=1740587633"},{"product_id":"bal-rv-products-adnik-225007-slide-out-motor-and-gearbox-assembly-new","title":"BAL Slide-Out Motor + Gearbox | 225007 | Standard Torque | Pre-Greased","description":"\u003cp\u003eRestore reliable slide-out operation to your BAL cable slide-out system with the \u003cstrong\u003eBAL RV Products 225007 Slide-Out Motor and Gearbox Assembly (Standard Torque)\u003c\/strong\u003e. Genuine BAL OEM motor and gearbox pre-greased and ready for installation. The standard-torque variant for typical BAL cable slide-out applications.\u003c\/p\u003e\n\n\u003ch3\u003eStandard (Mid) Torque Variant\u003c\/h3\u003e\n\u003cp\u003eThe 225007 is the \u003cstrong\u003estandard (mid) torque version\u003c\/strong\u003e. The \u003cstrong\u003e225008 is the high-torque sibling\u003c\/strong\u003e for heavier or higher-load slide-out applications. Match the torque rating to your original slide-out specification — if you're not sure which you need, verify against your existing motor's part number.\u003c\/p\u003e\n\n\u003ch3\u003eNeed More Torque? See the High-Torque Sibling\u003c\/h3\u003e\n\u003cp\u003eIf your slide-out is heavier or requires more torque than the standard 225007 provides, see the \u003ca href=\"https:\/\/thervsurplus.com\/products\/bal-rv-products-adnik-225008-slide-out-motor-and-gearbox-assembly\"\u003eBAL 225008 High-Torque Slide-Out Motor and Gearbox Assembly\u003c\/a\u003e — same architecture, higher torque output.\u003c\/p\u003e\n\n\u003ch3\u003eFor BAL Cable Slide-Out Systems\u003c\/h3\u003e\n\u003cp\u003eDesigned specifically for the \u003cstrong\u003eBAL cable slide-out system\u003c\/strong\u003e. Not interchangeable with other slide-out architectures.\u003c\/p\u003e\n\n\u003ch3\u003eCross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e225007\u003c\/strong\u003e (set\/assembly)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eR25074\u003c\/strong\u003e (motor component)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eR25076\u003c\/strong\u003e (gearbox component)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMotor Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMid torque\u003c\/strong\u003e output\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLow-noise operation\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLong-lasting\u003c\/strong\u003e construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePre-Greased for Installation\u003c\/h3\u003e\n\u003cp\u003eNew units ship in manufacturer bags — \u003cstrong\u003epre-greased\u003c\/strong\u003e and ready for installation.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Recommended\u003c\/h3\u003e\n\u003cp\u003eInvolves 12V DC electrical wiring and integration with the BAL cable slide-out mechanism. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e unless you're comfortable with slide-out mechanism service.\u003c\/p\u003e\n\n\u003ch3\u003e1-Year RV Surplus Warranty\u003c\/h3\u003e\n\n\u003ch3\u003eGenuine BAL \/ Adnik OEM\u003c\/h3\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine BAL RV Products (Adnik) OEM\u003c\/strong\u003e slide-out motor + gearbox assembly\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eStandard (mid) torque variant\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-torque sibling available:\u003c\/strong\u003e BAL 225008\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eFor BAL cable slide-out systems\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLow-noise operation\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-greased\u003c\/strong\u003e — ready for installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross-references:\u003c\/strong\u003e 225007, R25074 (motor), R25076 (gearbox)\u003c\/li\u003e\n  \u003cli\u003eShips new in manufacturer bag\u003c\/li\u003e\n  \u003cli\u003eBacked by 1-year RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: BAL RV Products (Adnik)\u003c\/li\u003e\n  \u003cli\u003ePart Number (Assembly): 225007\u003c\/li\u003e\n  \u003cli\u003ePart Number (Motor): R25074\u003c\/li\u003e\n  \u003cli\u003ePart Number (Gearbox): R25076\u003c\/li\u003e\n  \u003cli\u003eType: Slide-Out Motor and Gearbox Assembly (Standard Torque)\u003c\/li\u003e\n  \u003cli\u003eTorque Variant: Standard (Mid) Torque\u003c\/li\u003e\n  \u003cli\u003eHigh-Torque Sibling: BAL 225008\u003c\/li\u003e\n  \u003cli\u003eCompatible System: BAL cable slide-out system\u003c\/li\u003e\n  \u003cli\u003eCondition: New in manufacturer bag (pre-greased)\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BAL","offers":[{"title":"Default Title","offer_id":51059416432943,"sku":"","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/51oNvPz1ybL._AC_SL1080.jpg?v=1740587971"},{"product_id":"venture-8532-18ht-lci-168956-9100rpm-12vdc-slide-out-motor-new-pull-off-oem","title":"AP Products Venture Slide-Out Motor | 8532-18HT | 18:1 | 132682","description":"\u003cp\u003eRestore reliable slide-out operation with the \u003cstrong\u003eAP Products Venture 8532-18HT 18:1 Slide-Out Motor (LCI 168956 \/ 132682)\u003c\/strong\u003e. Genuine OEM replacement Venture actuator motor for Lippert slide-out systems — center-drive configuration with 2-1\/4\" inner gear and connector included.\u003c\/p\u003e\n\n\u003ch3\u003eFor Lippert Slide-Out Systems\u003c\/h3\u003e\n\u003cp\u003eDesigned as a genuine OEM replacement Venture actuator motor for Lippert slide-out installations.\u003c\/p\u003e\n\n\u003ch3\u003eMotor Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGear Ratio:\u003c\/strong\u003e 18:1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 30 A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 5,800 RPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrive Type:\u003c\/strong\u003e Center Drive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Gear:\u003c\/strong\u003e 2-1\/4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWith Connector Included\u003c\/h3\u003e\n\u003cp\u003eConnector included — simplifies installation vs bare-wire motors requiring field terminations.\u003c\/p\u003e\n\n\u003ch3\u003eCross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eAP Products 014-132682\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLCI 168956\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLCI 132682\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUPC: 711217013096\u003c\/h3\u003e\n\n\u003ch3\u003eGenuine OEM\u003c\/h3\u003e\n\u003cp\u003eGenuine AP Products Venture OEM replacement — the same motor architecture found in original Lippert slide-out installations.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Required\u003c\/h3\u003e\n\u003cp\u003eSlide-out motor replacement involves 12V DC electrical wiring and slide-out actuator integration. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e. Always verify smooth slide operation across the full extension\/retraction range after installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) Slide-Out Venture actuator motor (with connector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine AP Products Venture 8532-18HT\u003c\/strong\u003e slide-out actuator motor\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e18:1 gear ratio\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e12V DC, 30A\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e5,800 RPM\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter drive\u003c\/strong\u003e configuration\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e2-1\/4\" inner gear\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eConnector included\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eFor Lippert slide-out systems\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross-references:\u003c\/strong\u003e AP Products 014-132682, LCI 168956, LCI 132682\u003c\/li\u003e\n  \u003cli\u003eUPC: 711217013096\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: AP Products\u003c\/li\u003e\n  \u003cli\u003eModel: Venture 8532-18HT\u003c\/li\u003e\n  \u003cli\u003ePart Number: 014-132682\u003c\/li\u003e\n  \u003cli\u003eCross-References: LCI 168956, LCI 132682\u003c\/li\u003e\n  \u003cli\u003eUPC: 711217013096\u003c\/li\u003e\n  \u003cli\u003eType: Slide-Out Venture Actuator Motor\u003c\/li\u003e\n  \u003cli\u003eGear Ratio: 18:1\u003c\/li\u003e\n  \u003cli\u003eVoltage: 12V DC\u003c\/li\u003e\n  \u003cli\u003eAmperage: 30 A\u003c\/li\u003e\n  \u003cli\u003eSpeed: 5,800 RPM\u003c\/li\u003e\n  \u003cli\u003eDrive Type: Center Drive\u003c\/li\u003e\n  \u003cli\u003eInner Gear: 2-1\/4\"\u003c\/li\u003e\n  \u003cli\u003eConnector: Included\u003c\/li\u003e\n  \u003cli\u003eCompatibility: Lippert slide-out systems\u003c\/li\u003e\n  \u003cli\u003eIncludes: Motor with connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Venture","offers":[{"title":"Default Title","offer_id":51059419152687,"sku":"","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/s-l1600_45.webp?v=1740588285"},{"product_id":"lippert-components-421484-ground-control-tt-leveling-touchpad-new-lci-rv-camper","title":"Lippert Leveling Touchpad | 421484 | Ground Control TT | LCI OEM","description":"\u003cp\u003eRestore control to your RV leveling system with the \u003cstrong\u003eLippert 421484 Ground Control TT Leveling Touchpad\u003c\/strong\u003e. Genuine Lippert OEM replacement touchpad — the interface control that lets you operate your Ground Control TT and compatible Lippert leveling systems with a single auto-leveling button.\u003c\/p\u003e\n\n\u003ch3\u003eFor Lippert Ground Control TT Leveling Systems\u003c\/h3\u003e\n\u003cp\u003eSpecifically for \u003cstrong\u003eLippert Ground Control TT (Travel Trailer)\u003c\/strong\u003e leveling systems and other compatible Lippert leveling architectures. Auto-leveling button on the touchpad enables one-touch leveling operation once installed.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Verify Compatibility Before Ordering\u003c\/h3\u003e\n\u003cp\u003eLippert leveling systems come in multiple variants that use different touchpad architectures. Consult your original equipment before purchasing to ensure this 421484 touchpad matches your specific leveling system installation.\u003c\/p\u003e\n\n\u003ch3\u003eSeamless Genuine OEM Replacement\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Lippert OEM\u003c\/strong\u003e replacement part\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeamless integration\u003c\/strong\u003e with existing Lippert leveling systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect swap\u003c\/strong\u003e for original touchpad without system-level modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAuto-Leveling Button\u003c\/h3\u003e\n\u003cp\u003eFeatures a dedicated \u003cstrong\u003eauto-leveling button\u003c\/strong\u003e — enables one-touch automatic leveling operation for a comprehensive replacement of your RV's leveling interface.\u003c\/p\u003e\n\n\u003ch3\u003eBlack and Grey Module Design\u003c\/h3\u003e\n\u003cp\u003eBlack and grey aesthetic that integrates cleanly into standard RV interior control panel installations.\u003c\/p\u003e\n\n\u003ch3\u003eSimplifies RV Setup\u003c\/h3\u003e\n\u003cp\u003eLippert leveling touchpads streamline arrival-day RV setup:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFaster leveling\u003c\/strong\u003e vs manual leveling procedures\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMore convenient stabilization\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafe, stable foundation\u003c\/strong\u003e once leveled\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEquipment Maintenance Reminder\u003c\/h3\u003e\n\u003cp\u003ePeriodic inspection and maintenance of your leveling system is vital for optimal performance and safe operation. Address any issues promptly to prevent damage to jacks, controllers, or the leveling module itself.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Recommended\u003c\/h3\u003e\n\u003cp\u003eInvolves 12V DC wiring and integration with the Lippert leveling control system. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e unless you have prior experience with Lippert leveling system components.\u003c\/p\u003e\n\n\u003ch3\u003e60-Day RV Surplus Warranty\u003c\/h3\u003e\n\n\u003ch3\u003eGenuine Lippert OEM\u003c\/h3\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Lippert (LCI) OEM\u003c\/strong\u003e leveling touchpad\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 421484\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor Lippert Ground Control TT\u003c\/strong\u003e leveling systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible with other Lippert leveling systems\u003c\/strong\u003e (verify against original equipment)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAuto-leveling button\u003c\/strong\u003e for one-touch operation\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eBlack and grey module design\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeamless replacement\u003c\/strong\u003e for existing OEM touchpads\u003c\/li\u003e\n  \u003cli\u003eBacked by 60-day RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Lippert (LCI)\u003c\/li\u003e\n  \u003cli\u003ePart Number: 421484\u003c\/li\u003e\n  \u003cli\u003eType: RV Leveling Touchpad Controller\u003c\/li\u003e\n  \u003cli\u003ePrimary System: Ground Control TT (Travel Trailer)\u003c\/li\u003e\n  \u003cli\u003eAdditional Compatibility: Other Lippert leveling systems (verify before ordering)\u003c\/li\u003e\n  \u003cli\u003eFeatures: Auto-leveling button\u003c\/li\u003e\n  \u003cli\u003eColor: Black and grey\u003c\/li\u003e\n  \u003cli\u003eFunction: RV leveling system control interface\u003c\/li\u003e\n  \u003cli\u003eWarranty: 60-day RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51256449859887,"sku":"","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/s-l1600_88.webp?v=1745281046"},{"product_id":"norco-bal-r25079-rh-12vdc-37w-10-0a-10-teeth-20r-min-motor","title":"BAL Norco R25079 Slide-Out Motor Kit | 10-Tooth | RH \/ LH | 12V","description":"\u003cp\u003eReplace a failed motor on your BAL EXACT-Slide slide-out system with the \u003cstrong\u003eBAL \/ Norco R25079 RH 10-Tooth Sprocket Motor Kit\u003c\/strong\u003e. Genuine BAL\/Norco OEM motor kit with gearbox and 10-tooth sprocket for right-hand bottom mount OR left-hand top mount positions on compatible EXACT-Slide systems. Brand new.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Discontinued Individually — Replacement Set Available\u003c\/h3\u003e\n\u003cp\u003eThe R25079 motor kit is being \u003cstrong\u003ediscontinued by the manufacturer as a separate item\u003c\/strong\u003e. As stock goes out market-wide, buyers will need to purchase the \u003ca href=\"https:\/\/thervsurplus.com\/products\/bal-norco-21700292-motor-replacement-kit-r25078-r25079-21900004-21900005\"\u003eBAL\/Norco 21700292 Motor Replacement Kit\u003c\/a\u003e — which includes both R25078 and R25079 as a set.\u003c\/p\u003e\n\u003cp\u003eBuy this individual R25079 while it's still available if that's what your installation needs — otherwise plan on the 21700292 replacement set going forward.\u003c\/p\u003e\n\n\u003ch3\u003eMounting Position Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRight-hand bottom mount\u003c\/strong\u003e — primary use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLeft-hand top mount\u003c\/strong\u003e — alternate use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe kit can serve either position on compatible EXACT-Slide systems.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Motor Identification Required Before Ordering\u003c\/h3\u003e\n\u003cp\u003eCritical fitment note: \u003cstrong\u003eBAL EXACT-Slide systems used different motor and gearbox assemblies depending on when the RV was manufactured\u003c\/strong\u003e. Your existing motor assembly needs to be identified before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to identify:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRV manufacturing date\u003c\/strong\u003e can help narrow down which motor is needed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor RVs built in September 2022\u003c\/strong\u003e specifically, remove the jamb clamp and identify the motor by:\u003c\/li\u003e\n  \u003cul\u003e\n    \u003cli\u003eThe \u003cstrong\u003elabel on the motor\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003eThe \u003cstrong\u003etooth count on the sprocket\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003eThe \u003cstrong\u003emechanism number on the sticker inside the jamb\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e⚠️ 10-Tooth Sprocket — Image Note\u003c\/h3\u003e\n\u003cp\u003eImportant image note: the product image shows a \u003cstrong\u003e12-tooth sprocket\u003c\/strong\u003e, but this listing is for the \u003cstrong\u003e10-tooth version\u003c\/strong\u003e — you will receive the 10-tooth sprocket.\u003c\/p\u003e\n\u003cp\u003eThe 12-tooth version is also available in our store when in stock — verify tooth count matches your existing motor before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eMotor Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 37W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 10.0 A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 20 RPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSprocket:\u003c\/strong\u003e 10-tooth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eR25079\u003c\/strong\u003e (motor kit)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e10800098\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e21900005\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e10800185\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e7-3\/4\" H × 2-3\/4\" W × 1-1\/2\" D\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) R25079 motor\u003c\/li\u003e\n  \u003cli\u003eGearbox\u003c\/li\u003e\n  \u003cli\u003e10-tooth sprocket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBrand New\u003c\/h3\u003e\n\u003cp\u003eThese motors are brand new.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Required\u003c\/h3\u003e\n\u003cp\u003eSlide-out motor replacement involves 12V DC electrical wiring and integration with the EXACT-Slide slide-out mechanism. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e. Always verify smooth slide operation across the full extension\/retraction range after installation.\u003c\/p\u003e\n\n\u003ch3\u003eGenuine BAL \/ Norco OEM\u003c\/h3\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine BAL \/ Norco OEM\u003c\/strong\u003e motor kit for EXACT-Slide slide-out systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e R25079\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eRight-hand bottom mount OR left-hand top mount\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10-tooth sprocket\u003c\/strong\u003e (image shows 12-tooth for reference)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e12V DC, 37W, 10.0A, 20 RPM\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eIncludes gearbox + 10-tooth sprocket\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross-references:\u003c\/strong\u003e 10800098, 21900005, 10800185\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e⚠️ DISCONTINUED individually\u003c\/strong\u003e — use 21700292 kit when this is no longer available\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor identification required\u003c\/strong\u003e before ordering (BAL EXACT-Slide systems vary by build date)\u003c\/li\u003e\n  \u003cli\u003eDimensions: 7-3\/4\" × 2-3\/4\" × 1-1\/2\"\u003c\/li\u003e\n  \u003cli\u003eBrand new\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: BAL \/ Norco\u003c\/li\u003e\n  \u003cli\u003ePart Number: R25079\u003c\/li\u003e\n  \u003cli\u003eCross-References: 10800098, 21900005, 10800185\u003c\/li\u003e\n  \u003cli\u003eType: EXACT-Slide Slide-Out Motor Kit (with Gearbox and 10-Tooth Sprocket)\u003c\/li\u003e\n  \u003cli\u003eMounting Position: Right-hand bottom mount OR left-hand top mount\u003c\/li\u003e\n  \u003cli\u003eSprocket Tooth Count: 10\u003c\/li\u003e\n  \u003cli\u003eVoltage: 12V DC\u003c\/li\u003e\n  \u003cli\u003ePower: 37 W\u003c\/li\u003e\n  \u003cli\u003eCurrent: 10.0 A\u003c\/li\u003e\n  \u003cli\u003eSpeed: 20 RPM\u003c\/li\u003e\n  \u003cli\u003eDimensions: 7-3\/4\" H × 2-3\/4\" W × 1-1\/2\" D\u003c\/li\u003e\n  \u003cli\u003eCompatible System: BAL EXACT-Slide Slide-Out Systems (verify against your motor before ordering)\u003c\/li\u003e\n  \u003cli\u003eStatus: Discontinued individually — replacement set (21700292) available\u003c\/li\u003e\n  \u003cli\u003eIncludes: Motor, gearbox, 10-tooth sprocket\u003c\/li\u003e\n  \u003cli\u003eCondition: Brand new\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BAL","offers":[{"title":"Default Title","offer_id":51405520601391,"sku":"","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/s-l1600_91.webp?v=1749389068"},{"product_id":"lippert-ground-control®-3-0-hall-effect-jack-motor-343758","title":"Lippert Ground Control 3.0 Hall Effect Jack Motor | 343758 | OEM","description":"\u003cp\u003eRestore reliable leveling to your RV with the \u003cstrong\u003eLippert 343758 Ground Control 3.0 Hall Effect Jack Motor\u003c\/strong\u003e. Genuine Lippert OEM replacement motor engineered specifically for Ground Control 3.0 leveling systems. Precision hall effect design for accurate leveling operation.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifically for Ground Control 3.0 Systems\u003c\/h3\u003e\n\u003cp\u003eDesigned as an \u003cstrong\u003eexact-fit replacement\u003c\/strong\u003e for the hall effect jack motor on Lippert Ground Control 3.0 leveling systems. Not intended for other Lippert leveling architectures (Ground Control TT, older Ground Control variants, or other leveling systems).\u003c\/p\u003e\n\n\u003ch3\u003eHall Effect Precision\u003c\/h3\u003e\n\u003cp\u003eThe hall effect design provides \u003cstrong\u003eprecise position feedback\u003c\/strong\u003e to the Ground Control 3.0 control system — critical for accurate automatic leveling operation and safe jack positioning.\u003c\/p\u003e\n\n\u003ch3\u003eCompanion Component — Ground Control 3.0 Control Module\u003c\/h3\u003e\n\u003cp\u003eServing your Ground Control 3.0 system? The \u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-components-803280-onecontrol-gc-3-0-advantage-4pt-fifth-wheel-leveler-assy-25057-smart-home-technology\"\u003eLippert 803280 Ground Control 3.0 Advantage 4-Point Control Module\u003c\/a\u003e is available if you're also servicing the control side of the system.\u003c\/p\u003e\n\n\u003ch3\u003eMotor Dimensions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 6.69\" × 7.25\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWiring Harness:\u003c\/strong\u003e 7.5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eStreamlined RV Setup\u003c\/h3\u003e\n\u003cp\u003eLippert's automatic leveling systems simplify arrival-day RV setup:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFaster leveling\u003c\/strong\u003e vs manual procedures\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafe, stable foundation\u003c\/strong\u003e once leveled\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReliable stabilization\u003c\/strong\u003e for extended stays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Required\u003c\/h3\u003e\n\u003cp\u003eLeveling jack motor replacement involves 12V DC electrical wiring, hall effect sensor integration, and mechanical jack assembly work. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e. Always verify safe operation across the full jack extension\/retraction range after installation.\u003c\/p\u003e\n\n\u003ch3\u003eGenuine Lippert OEM\u003c\/h3\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Lippert (LCI) OEM\u003c\/strong\u003e hall effect jack motor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 343758\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecifically for Lippert Ground Control 3.0\u003c\/strong\u003e leveling systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHall effect design\u003c\/strong\u003e for precise position feedback\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision replacement\u003c\/strong\u003e — exact-fit for Ground Control 3.0\u003c\/li\u003e\n  \u003cli\u003eMotor dimensions: 6.69\" × 7.25\"\u003c\/li\u003e\n  \u003cli\u003eWiring harness: 7.5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Lippert (LCI)\u003c\/li\u003e\n  \u003cli\u003ePart Number: 343758\u003c\/li\u003e\n  \u003cli\u003eType: Hall Effect Jack Motor\u003c\/li\u003e\n  \u003cli\u003eCompatible System: Lippert Ground Control 3.0 (specific fit)\u003c\/li\u003e\n  \u003cli\u003eNOT Compatible With: Other Lippert leveling architectures\u003c\/li\u003e\n  \u003cli\u003eMotor Dimensions: 6.69\" × 7.25\"\u003c\/li\u003e\n  \u003cli\u003eWiring Harness Length: 7.5\"\u003c\/li\u003e\n  \u003cli\u003eFeedback Type: Hall Effect (precision position sensing)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51422121918767,"sku":"","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/343758_Lippert_LippertGroundControl30HallEffectJackMotor343758_LevelingStabiliza_0_1.jpg?v=1749665765"},{"product_id":"lippert-4-point-controller-ground-control-2-0-242623","title":"Lippert Ground Control 2.0 Control Module | 242623 | 4-Point | OEM","description":"\u003cp\u003eRestore control to your Lippert Ground Control 2.0 electric leveling system with the \u003cstrong\u003eLippert 242623 Ground Control 2.0 4-Point Control Module (OEM 14346)\u003c\/strong\u003e. Genuine Lippert OEM replacement control module for 4-point Ground Control 2.0 leveling installations.\u003c\/p\u003e\n\u003ch3\u003eSpecifically for Ground Control 2.0 Systems\u003c\/h3\u003e\n\u003cp\u003eDesigned as a direct replacement for the control module on \u003cstrong\u003eLippert Ground Control 2.0 electric leveling systems\u003c\/strong\u003e. Compatible with 4-point Ground Control 2.0 installations.\u003c\/p\u003e\n\u003ch3\u003e⚠️ Not Interchangeable with GC 3.0 or GC TT\u003c\/h3\u003e\n\u003cp\u003eImportant compatibility note: Ground Control 2.0 is a distinct architecture from Ground Control 3.0 and Ground Control TT. This 242623 is for \u003cstrong\u003eGC 2.0 systems ONLY\u003c\/strong\u003e. Do not use for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround Control 3.0\u003c\/strong\u003e — use \u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-components-803280-onecontrol-gc-3-0-advantage-4pt-fifth-wheel-leveler-assy-25057-smart-home-technology\"\u003eLippert 803280 Ground Control 3.0 Advantage Control Module\u003c\/a\u003e instead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround Control TT (Travel Trailer)\u003c\/strong\u003e — use \u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-onecontrol-leveling-control-board-2021025693-m-3k-3k-tt\"\u003eLippert 2021025693 OneControl M-3K-3K TT Control Board\u003c\/a\u003e instead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e242623\u003c\/strong\u003e (current)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14346\u003c\/strong\u003e (OEM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e⚠️ Professional Installation Required\u003c\/h3\u003e\n\u003cp\u003eInvolves 12V DC wiring and integration with the Lippert Ground Control 2.0 leveling system. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e. Always verify safe leveling operation across the full jack extension\/retraction range after installation.\u003c\/p\u003e\n\u003ch3\u003e⚠️ Direct-Ship from Lippert — Standard Lead Time Applies\u003c\/h3\u003e\n\u003cp\u003eThis is a \u003cstrong\u003eLippert direct-ship item\u003c\/strong\u003e — expect standard Lippert 3-5 business-day lead time before shipment.\u003c\/p\u003e\n\u003ch3\u003e1-Year Manufacturer Warranty\u003c\/h3\u003e\n\u003ch3\u003eGenuine Lippert OEM\u003c\/h3\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Lippert (LCI) OEM\u003c\/strong\u003e Ground Control 2.0 control module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 242623 (OEM 14346)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Lippert Ground Control 2.0\u003c\/strong\u003e electric leveling systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-point controller\u003c\/strong\u003e configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNOT interchangeable\u003c\/strong\u003e with Ground Control 3.0 or Ground Control TT\u003c\/li\u003e\n\u003cli\u003eBacked by 1-year manufacturer warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-ship from Lippert\u003c\/strong\u003e — 3-5 business day lead time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Lippert (LCI)\u003c\/li\u003e\n\u003cli\u003ePart Number: 242623\u003c\/li\u003e\n\u003cli\u003eOEM Part Number: 14346\u003c\/li\u003e\n\u003cli\u003eType: 4-Point Control Module\u003c\/li\u003e\n\u003cli\u003eCompatible System: Lippert Ground Control 2.0 electric leveling systems\u003c\/li\u003e\n\u003cli\u003eNOT Compatible With: Ground Control 3.0 (use 803280), Ground Control TT (use 2021025693)\u003c\/li\u003e\n\u003cli\u003eConfiguration: 4-point\u003c\/li\u003e\n\u003cli\u003eWarranty: 1-year manufacturer warranty\u003c\/li\u003e\n\u003cli\u003eShipping: Direct-ship from Lippert (3-5 business day lead time)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51429905531183,"sku":"","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/242623_Lippert_4PointControllerGroundControl20_LevelingStabilization_0_1_1.webp?v=1749734434"},{"product_id":"replacement-controller-for-4-point-leveling-and-slide-outs-2020003067-26095","title":"Lippert 4-Point Leveling + Slide-Out Control Module | 2020003067","description":"\u003cp\u003eRestore control to your Lippert 4-point hydraulic leveling and slide-out system with the \u003cstrong\u003eLippert 2020003067 Control Module (Vendor Part #06-8294 \/ SKU 26095)\u003c\/strong\u003e. Current production consolidated replacement controller for LCI 4-point systems configured without a rear sensor. Supersedes 6 legacy part numbers with plug-and-play fit using the existing LCI harness connector.\u003c\/p\u003e\n\n\u003ch3\u003eSupersedes 6 Legacy Part Numbers\u003c\/h3\u003e\n\u003cp\u003eThe 2020003067 is the current consolidated replacement for these legacy LCI controller part numbers:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e175226\u003c\/strong\u003e — early production 4-point controller\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e364557\u003c\/strong\u003e — mid-generation 4-point controller\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e365150\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e427964\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e677558\u003c\/strong\u003e — updated 4-point controller\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e812821\u003c\/strong\u003e — previous-generation 4-point controller (no rear sensor)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your existing module carries any of these numbers on its label, the 2020003067 is the correct current replacement — one current part number covers all six legacy modules.\u003c\/p\u003e\n\n\u003ch3\u003eWhat This Controller Does\u003c\/h3\u003e\n\u003cp\u003eThe control module is the \u003cstrong\u003ecentral processing unit of your LCI hydraulic leveling and slide-out system\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eReads input from the leveling touchpad\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eInterprets jack position and system pressure data\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eSequences the hydraulic pump and solenoid valves\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eExecutes automatic and manual leveling routines\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCommon Failure Symptoms This Part Addresses\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTouchpad unresponsive or blank\u003c\/li\u003e\n  \u003cli\u003eJacks won't deploy or retract\u003c\/li\u003e\n  \u003cli\u003eSystem powers on but auto-level won't run\u003c\/li\u003e\n  \u003cli\u003ePersistent fault or error codes on the display\u003c\/li\u003e\n  \u003cli\u003eOne or more jacks not responding to commands\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDirect Plug-In Fit — No Rewiring\u003c\/h3\u003e\n\u003cp\u003eUses the \u003cstrong\u003eexisting LCI harness connector\u003c\/strong\u003e — no splicing, no rewiring, no reprogramming on compatible systems. Once connected, the module is ready to operate.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Critical Fitment — 4-Point, No Rear Sensor\u003c\/h3\u003e\n\u003cp\u003eThis module is \u003cstrong\u003eONLY for 4-point LCI hydraulic leveling systems WITHOUT a rear sensor\u003c\/strong\u003e. NOT compatible with:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003e6-point leveling systems\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eSystems with a rear height sensor\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eSystems using a separate slide-out controller\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstalling this module on the wrong system configuration will result in leveling malfunctions.\u003c\/p\u003e\n\n\u003ch3\u003eConfirm Before You Order\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCheck the part number\u003c\/strong\u003e on your existing controller label — should match one of the six superseded numbers above\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCount your jacks:\u003c\/strong\u003e exactly 4 jacks required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCheck for a rear sensor harness\u003c\/strong\u003e — if you have one, this module isn't compatible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContact LCI at 1-574-535-1125\u003c\/strong\u003e with your system serial number if uncertain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical System Configuration This Fits\u003c\/h3\u003e\n\u003cp\u003eDesigned for LCI electric-over-hydraulic leveling and slide-out systems installed on:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eClass A motorhomes\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eFifth wheels\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eTravel trailers\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCommon LCI system families in this configuration include OneControl-compatible and older slide-out\/leveling combo systems produced through the mid-2010s and later.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Overview\u003c\/h3\u003e\n\u003cp\u003eThe control module is typically mounted inside a compartment near the hydraulic pump assembly or on a bracket near the chassis. Replacement involves:\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eDisconnect 12V power (disconnect coach battery)\u003c\/li\u003e\n  \u003cli\u003eDisconnect the existing module's multi-pin harness connector\u003c\/li\u003e\n  \u003cli\u003eRemove the module from its mounting bracket (2-4 screws)\u003c\/li\u003e\n  \u003cli\u003eTransfer the bracket if needed, then mount the new module\u003c\/li\u003e\n  \u003cli\u003eReconnect the harness\u003c\/li\u003e\n  \u003cli\u003eTest all four jacks individually before running auto-level\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eNo programming or initialization is required on compatible systems. If your system uses OneControl integration, confirm firmware compatibility with LCI after installation.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ What's NOT Included\u003c\/h3\u003e\n\u003cp\u003eThis part replaces the \u003cstrong\u003econtroller module ONLY\u003c\/strong\u003e. Not included:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTouchpad \/ hand control\u003c\/li\u003e\n  \u003cli\u003eHydraulic pump, motor, or valves\u003c\/li\u003e\n  \u003cli\u003eJacks or jack hardware\u003c\/li\u003e\n  \u003cli\u003eWiring harness or mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your leveling system problem is traced to a failed pump, solenoid valve, or touchpad, this controller alone will not resolve those issues. Diagnose the specific failed component before replacing parts.\u003c\/p\u003e\n\n\u003ch3\u003ePart Identification\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLippert Part Number:\u003c\/strong\u003e 2020003067\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVendor Part Number:\u003c\/strong\u003e 06-8294\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 26095 (and 045-175226)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWeight\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3 lbs\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eElectrical\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem Voltage:\u003c\/strong\u003e 12V DC (standard RV chassis)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Multi-pin harness connector (existing LCI wiring harness)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Recommended\u003c\/h3\u003e\n\u003cp\u003eInvolves 12V DC electrical wiring and integration with the LCI hydraulic leveling and slide-out control system. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e unless you have prior experience with LCI leveling system service. Always disconnect the coach battery before removing or installing the control module.\u003c\/p\u003e\n\n\u003ch3\u003e1-Year Limited Manufacturer Warranty\u003c\/h3\u003e\n\n\u003ch3\u003eGenuine Lippert OEM\u003c\/h3\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Lippert (LCI) OEM\u003c\/strong\u003e control module\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 2020003067 (Vendor 06-8294, SKU 26095)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupersedes 6 legacy part numbers:\u003c\/strong\u003e 175226, 364557, 365150, 427964, 677558, 812821\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor 4-point LCI hydraulic leveling + slide-out systems\u003c\/strong\u003e WITHOUT rear sensor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect plug-and-play fit\u003c\/strong\u003e using existing LCI harness connector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo rewiring, no programming\u003c\/strong\u003e required on compatible systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNOT compatible with 6-point systems\u003c\/strong\u003e or systems with rear sensor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e12V DC\u003c\/strong\u003e standard RV chassis\u003c\/li\u003e\n  \u003cli\u003eWeight: 3 lbs\u003c\/li\u003e\n  \u003cli\u003eController module ONLY — no touchpad, pump, valves, jacks, or harness included\u003c\/li\u003e\n  \u003cli\u003eBacked by 1-year limited manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Lippert (LCI)\u003c\/li\u003e\n  \u003cli\u003eLippert Part Number: 2020003067\u003c\/li\u003e\n  \u003cli\u003eVendor Part Number: 06-8294\u003c\/li\u003e\n  \u003cli\u003eSKUs: 26095, 045-175226\u003c\/li\u003e\n  \u003cli\u003eType: Control Module \/ Controller (Leveling + Slide-Out)\u003c\/li\u003e\n  \u003cli\u003eSupersedes: 175226, 364557, 365150, 427964, 677558, 812821\u003c\/li\u003e\n  \u003cli\u003eLeveling System Type: LCI Hydraulic (Electric-Over-Hydraulic)\u003c\/li\u003e\n  \u003cli\u003eJacks Supported: 4-point (four jacks)\u003c\/li\u003e\n  \u003cli\u003eRear Sensor: NOT supported (for systems WITHOUT rear sensor)\u003c\/li\u003e\n  \u003cli\u003eSlide-Out Control: Included (per Lippert)\u003c\/li\u003e\n  \u003cli\u003eTypical RV Types: Class A motorhomes, fifth wheels, travel trailers with LCI hydraulic leveling\u003c\/li\u003e\n  \u003cli\u003eSystem Voltage: 12V DC\u003c\/li\u003e\n  \u003cli\u003eConnection: Multi-pin harness (existing LCI wiring)\u003c\/li\u003e\n  \u003cli\u003eWeight: 3 lbs\u003c\/li\u003e\n  \u003cli\u003eIncluded: Control module only\u003c\/li\u003e\n  \u003cli\u003eNOT Included: Touchpad, pump, motor, valves, jacks, harness, mounting hardware\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year limited manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51458147877167,"sku":"","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/2020003067_Lippert_ReplacementControllerfor4PointLevelingandSlideOuts_LevelingSt_0_1_1.webp?v=1749837050"},{"product_id":"lippert-in-wall®-ig-42-motor-assembly-for-rv-slide-outs-5mm-240015","title":"Lippert In-Wall Slide-Out Motor | 240015 | IG-42GM | 5mm Shaft | OEM","description":"\u003cp\u003eRestore reliable slide-out operation to your Lippert In-Wall (Schwintek) 5mm shaft slide-out system with the \u003cstrong\u003eLippert 240015 In-Wall IG-42GM 5mm Motor Assembly\u003c\/strong\u003e. Genuine Lippert OEM replacement — no assembly required, never needs adjustment, and installs with a drill and fast-bonding adhesive. This is the \u003cstrong\u003e5mm output shaft variant\u003c\/strong\u003e for older Schwintek In-Wall installations.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ CRITICAL — This is the 5mm Shaft Variant\u003c\/h3\u003e\n\u003cp\u003eLippert In-Wall (Schwintek) systems use either a \u003cstrong\u003e5mm or 10mm output shaft motor\u003c\/strong\u003e depending on when your RV was built and the slide size. Installing the wrong shaft size will prevent the motor from engaging the gear rack correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVerify your shaft size before ordering:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5mm shaft\u003c\/strong\u003e → this 240015 is the correct motor (this listing)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10mm shaft, 300:1 gear ratio\u003c\/strong\u003e → order \u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-in-wall%C2%AE-slide-out-motor-236575-oem\"\u003eLippert 236575 In-Wall 10mm 300:1 Motor\u003c\/a\u003e instead\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10mm shaft, 500:1 high-torque\u003c\/strong\u003e → order \u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-in-wall%C2%AE-slide-out-motor-high-torque-287298-oem\"\u003eLippert 287298 In-Wall 10mm 500:1 High-Torque Motor\u003c\/a\u003e instead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe motor label or the Lippert In-Wall system label on the wall frame identifies your motor model. Lippert's QR-144 Motor Part Number Identification guide (available at support.lci1.com) is the authoritative reference — or contact Lippert with your RV VIN.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Both Motors in a Slide MUST Match\u003c\/h3\u003e\n\u003cp\u003eEach slide-out has \u003cstrong\u003etwo motors — one in each upper corner of the wall assembly\u003c\/strong\u003e. If you're replacing only one motor, the replacement \u003cstrong\u003emust match the shaft size AND gear ratio\u003c\/strong\u003e of the motor that remains in place. Mixing motors of different specs will cause synchronization errors and potentially damage the slide system.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Direct-Ship from Lippert — Standard Lead Time Applies\u003c\/h3\u003e\n\u003cp\u003eThis is a \u003cstrong\u003eLippert direct-ship item\u003c\/strong\u003e — expect standard Lippert 3-5 business-day lead time before shipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow the LCI In-Wall (Schwintek) System Works\u003c\/h3\u003e\n\u003cp\u003eUnderstanding the mechanism helps diagnose motor failures vs other system issues:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame-in-frame design\u003c\/strong\u003e — no external mechanism. Outer frame is fixed in the RV wall; inner frame holds the slide-out room and rides on rollers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo IG-42 motors per slide-out\u003c\/strong\u003e — one in each upper corner. Each motor's output shaft engages a horizontal gear rack inside the wall\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnetic encoder for synchronization\u003c\/strong\u003e — each motor has an encoder that counts revolutions; the In-Wall controller tracks and synchronizes both motors\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eError codes\u003c\/strong\u003e — the controller reports specific error codes (see TI-177) when it detects motor faults, sync problems, or obstructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e⚠️ Resynchronize After Motor Replacement\u003c\/h3\u003e\n\u003cp\u003eAfter motor replacement, the controller must be resynchronized per \u003cstrong\u003eLippert Technical Information Sheet TI-177\u003c\/strong\u003e. Failure to resynchronize may result in the slide-out tracking unevenly or the controller reporting error codes.\u003c\/p\u003e\n\n\u003ch3\u003eCompatible with 70+ RV Brands\u003c\/h3\u003e\n\u003cp\u003eThe LCI In-Wall (Schwintek) system is standard equipment across more than 70 RV manufacturers including Grand Design, Keystone, Coachmen, Forest River, Heartland, Thor, and many others.\u003c\/p\u003e\n\n\u003ch3\u003eMotor Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo assembly required\u003c\/strong\u003e — all components come pre-attached\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNever needs adjustment\u003c\/strong\u003e — exact-match OEM component\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e12V DC operation\u003c\/strong\u003e from the RV house battery\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnetic encoder\u003c\/strong\u003e for synchronization with the partner motor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounts inside the slide-out wall\u003c\/strong\u003e — no external mechanical hardware required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Requirements\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill or cordless screw gun\u003c\/strong\u003e (NOT included)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast-bonding adhesive\u003c\/strong\u003e — Loctite or equivalent (NOT included)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlide-out retracted fully\u003c\/strong\u003e before starting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterior trim removal\u003c\/strong\u003e to access the motor housing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDo NOT use an impact driver\u003c\/strong\u003e — use a standard drill or cordless screw gun\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) Lippert 240015 IG-42GM 5mm motor assembly (fully pre-assembled)\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNOT Included — Required for Installation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast-bonding adhesive (Loctite or equivalent)\u003c\/li\u003e\n  \u003cli\u003eDrill or cordless screw gun\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNOT Included — May Need Separately:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIn-Wall controller (if controller, not motor, is root cause)\u003c\/li\u003e\n  \u003cli\u003eWiring harness (if damaged)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCommon Failure Symptoms This Part Addresses\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne side of the slide moves, other side does not (motor on non-moving side failed)\u003c\/li\u003e\n  \u003cli\u003eSlide moves unevenly (racks or skews)\u003c\/li\u003e\n  \u003cli\u003eGrinding noise during operation (possible internal gear wear)\u003c\/li\u003e\n  \u003cli\u003eSlide stops mid-travel (possible motor overheating)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e⚠️ Diagnose Before Replacing\u003c\/h3\u003e\n\u003cp\u003eThe In-Wall controller reports error codes that precisely identify the failure type — \u003cstrong\u003ealways read the error code first (per TI-177)\u003c\/strong\u003e before diagnosing or replacing any component. Many field issues are resolved by clearing an obstruction, cleaning the gear rack, or performing the resynchronization procedure — without any parts replacement.\u003c\/p\u003e\n\n\u003ch3\u003eWeight\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e8 lbs\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ California Prop 65 Warning\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause cancer and\/or reproductive harm. See P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Recommended\u003c\/h3\u003e\n\u003cp\u003eSlide-out motor replacement involves 12V DC electrical wiring, adhesive application, and mechanical work inside the slide-out wall assembly. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e unless you have prior experience with In-Wall system service. Always verify smooth slide operation across the full extension\/retraction range after installation.\u003c\/p\u003e\n\n\u003ch3\u003e1-Year Limited Manufacturer Warranty\u003c\/h3\u003e\n\n\u003ch3\u003eGenuine Lippert OEM\u003c\/h3\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Lippert (LCI) OEM\u003c\/strong\u003e In-Wall slide-out motor assembly\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 240015\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e IG-42GM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5mm output shaft\u003c\/strong\u003e — verify vs your existing motor before ordering\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor LCI In-Wall (Schwintek)\u003c\/strong\u003e slide-out systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10mm shaft siblings available:\u003c\/strong\u003e 236575 (300:1) and 287298 (500:1 high-torque)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo assembly required\u003c\/strong\u003e — all components pre-attached\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eNever needs adjustment\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e12V DC operation\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt-in magnetic encoder\u003c\/strong\u003e for synchronization\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect-ship from Lippert\u003c\/strong\u003e — 3-5 business day lead time\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRequires resync per TI-177\u003c\/strong\u003e after installation\u003c\/li\u003e\n  \u003cli\u003eInstallation tools: drill\/cordless screw gun + fast-bonding adhesive (both sold separately)\u003c\/li\u003e\n  \u003cli\u003eWeight: 8 lbs\u003c\/li\u003e\n  \u003cli\u003eBacked by 1-year limited manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Lippert (LCI)\u003c\/li\u003e\n  \u003cli\u003ePart Number: 240015\u003c\/li\u003e\n  \u003cli\u003eMotor Model: IG-42GM\u003c\/li\u003e\n  \u003cli\u003eOutput Shaft Size: 5mm\u003c\/li\u003e\n  \u003cli\u003eSystem Compatibility: LCI In-Wall (Schwintek) slide-out systems with 5mm motors\u003c\/li\u003e\n  \u003cli\u003eVoltage: 12V DC\u003c\/li\u003e\n  \u003cli\u003eMotors Per Slide-Out: 2 (one per upper corner)\u003c\/li\u003e\n  \u003cli\u003eAssembly Required: No\u003c\/li\u003e\n  \u003cli\u003eAdjustment Required: No\u003c\/li\u003e\n  \u003cli\u003eInstallation Tools: Drill or cordless screw gun; fast-bonding adhesive (not included)\u003c\/li\u003e\n  \u003cli\u003eResync Required After Install: Yes — per TI-177\u003c\/li\u003e\n  \u003cli\u003eWeight: 8 lbs\u003c\/li\u003e\n  \u003cli\u003e10mm Shaft Siblings: 236575 (300:1) and 287298 (500:1)\u003c\/li\u003e\n  \u003cli\u003eDirect-Ship Lead Time: 3-5 business days from Lippert\u003c\/li\u003e\n  \u003cli\u003eCalifornia Prop 65: Warning — cancer and reproductive harm\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51458597257519,"sku":"","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/240015_Lippert_LippertInWallIG42MotorAssemblyforRVSlideOuts5mm240015_SlideOutsLi_0_1.webp?v=1749837670"},{"product_id":"lippert-13398-d0-13398-c2-rv-motorhome-dual-motor-synchronous-velocity-slide-controller","title":"Lippert V-Sync II In-Wall Slide-Out Controller | 13398-D0 | OEM","description":"\u003cp\u003eRestore controller function to your Lippert In-Wall (Schwintek) slide-out system with the \u003cstrong\u003eLippert V-Sync II Slide-Out Controller (Part #13398-D0)\u003c\/strong\u003e. Genuine Lippert OEM replacement controller for In-Wall slide-outs — the \"brain\" that synchronizes the two IG-42 motors driving your slide. Exact-match component, no assembly required.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ 13398-D0 Supersedes 13398-C2\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e13398-D0 is the current version\u003c\/strong\u003e that has \u003cstrong\u003ereplaced the older 13398-C2\u003c\/strong\u003e. If your existing failed controller is a 13398-C2, this 13398-D0 is the correct current replacement.\u003c\/p\u003e\n\n\u003ch3\u003eWhat This Controller Does\u003c\/h3\u003e\n\u003cp\u003eThe V-Sync II is the \u003cstrong\u003ecentral brain of your Lippert In-Wall (Schwintek) slide-out system\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSynchronizes the two IG-42 motors\u003c\/strong\u003e that drive each slide-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTracks motor revolution counts\u003c\/strong\u003e from the magnetic encoders\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eSequences slide-out extension and retraction\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDetects faults and reports error codes\u003c\/strong\u003e (per TI-177)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen Controller Failure Symptoms Show\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBoth motors unresponsive despite adequate battery voltage\u003c\/li\u003e\n  \u003cli\u003ePersistent error codes even after clearing obstructions\u003c\/li\u003e\n  \u003cli\u003eSlide-out won't respond to switch commands\u003c\/li\u003e\n  \u003cli\u003eController powers on but won't execute commands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore replacing the controller, verify against motor and wiring issues — many field problems trace to motors, harness connections, or battery voltage rather than the controller itself.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Verify Compatibility Before Ordering\u003c\/h3\u003e\n\u003cp\u003eLippert In-Wall systems have used several controller variants over time. This 13398-D0 is designed for \u003cstrong\u003eIn-Wall slide-outs using the V-Sync II architecture\u003c\/strong\u003e. Consult your owner's manual or contact Lippert with your RV VIN to confirm this is the correct controller for your system.\u003c\/p\u003e\n\n\u003ch3\u003eCompanion Components — Schwintek In-Wall Motor Family\u003c\/h3\u003e\n\u003cp\u003eIf you're diagnosing a slide-out failure and need to service the motors instead of (or in addition to) the controller, we carry the full Schwintek motor family:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-in-wall%C2%AE-ig-42-motor-assembly-for-rv-slide-outs-5mm-240015\"\u003eLippert 240015 In-Wall 5mm shaft motor\u003c\/a\u003e — older installations\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-in-wall%C2%AE-slide-out-motor-236575-oem\"\u003eLippert 236575 In-Wall 10mm 300:1 motor\u003c\/a\u003e — most current installations\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-in-wall%C2%AE-slide-out-motor-high-torque-287298-oem\"\u003eLippert 287298 In-Wall 10mm 500:1 high-torque motor\u003c\/a\u003e — heavy slides\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow the Lippert In-Wall (Schwintek) System Works\u003c\/h3\u003e\n\u003cp\u003eThe In-Wall system was launched more than 5 years ago and is now standard equipment across \u003cstrong\u003emore than 70 RV brands\u003c\/strong\u003e — making cable slide-outs largely obsolete. The V-Sync II controller manages:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo IG-42 motors per slide\u003c\/strong\u003e — one in each upper corner of the wall assembly\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnetic encoder feedback\u003c\/strong\u003e for revolution counting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSynchronized motor operation\u003c\/strong\u003e — compensates for one motor lagging or leading\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eError code reporting\u003c\/strong\u003e for diagnostic troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEffortless Installation\u003c\/h3\u003e\n\u003cp\u003eExact-match component design means installation is hassle-free:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eNo assembly required\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine OEM part\u003c\/strong\u003e — no calibration or programming required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect plug-in fit\u003c\/strong\u003e using existing wiring harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e⚠️ Cosmetic Note\u003c\/h3\u003e\n\u003cp\u003eThese new units may have \u003cstrong\u003eminor markings on the casing from storage\u003c\/strong\u003e. Purely cosmetic — does NOT affect function.\u003c\/p\u003e\n\n\u003ch3\u003eIn-Hand — No Direct-Ship Delay\u003c\/h3\u003e\n\u003cp\u003eUnits are \u003cstrong\u003ein-stock and ready to ship\u003c\/strong\u003e — NO Lippert direct-ship lead time applies to this listing.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Recommended\u003c\/h3\u003e\n\u003cp\u003eInvolves 12V DC electrical wiring and integration with the In-Wall slide-out system. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e. Always disconnect the coach battery before removing or installing the controller.\u003c\/p\u003e\n\n\u003ch3\u003e1-Year RV Surplus Warranty\u003c\/h3\u003e\n\n\u003ch3\u003eGenuine Lippert OEM\u003c\/h3\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Lippert (LCI) OEM\u003c\/strong\u003e V-Sync II slide-out controller\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 13398-D0 (replaces 13398-C2)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor Lippert In-Wall (Schwintek)\u003c\/strong\u003e slide-out systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSynchronizes 2 IG-42 motors\u003c\/strong\u003e per slide-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eController module ONLY\u003c\/strong\u003e — no slide-out assembly, motors, or harness included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo assembly required\u003c\/strong\u003e — exact-match component\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCosmetic note:\u003c\/strong\u003e may have minor storage markings on casing (does not affect function)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eIn-hand, no Lippert direct-ship delay\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003eBacked by 1-year RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Lippert (LCI)\u003c\/li\u003e\n  \u003cli\u003ePart Number: 13398-D0\u003c\/li\u003e\n  \u003cli\u003eSupersedes: 13398-C2\u003c\/li\u003e\n  \u003cli\u003eModel: V-Sync II\u003c\/li\u003e\n  \u003cli\u003eType: In-Wall (Schwintek) Slide-Out Controller\u003c\/li\u003e\n  \u003cli\u003eSystem Compatibility: LCI In-Wall slide-out systems using V-Sync II\u003c\/li\u003e\n  \u003cli\u003eFunction: Dual motor synchronization, encoder feedback processing, error code reporting\u003c\/li\u003e\n  \u003cli\u003eIncluded: Controller module only\u003c\/li\u003e\n  \u003cli\u003eNOT Included: Slide-out assembly, motors, harness, mounting hardware\u003c\/li\u003e\n  \u003cli\u003eCondition: New (may show minor storage marks on casing)\u003c\/li\u003e\n  \u003cli\u003eShipping: In-stock, no Lippert direct-ship delay\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51522383249711,"sku":"","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/211852_Lippert_LippertReplacementInWallSlideOutControllerVSyncII13398DO_SlideOut_1_1_22.jpg?v=1750554398"},{"product_id":"lippert-lci-unity-xo-801172-25336-multi-function-slide-out-controller-assembly","title":"Lippert Unity X0 Slide-Out Controller | 801172 | Multi-Function | USA","description":"\u003cp\u003eReplace the multi-function slide-out controller on your Lippert Unity X0 system with the \u003cstrong\u003eLippert Unity X0 Multi-Function Slide-Out Controller Assembly (SKU 801172)\u003c\/strong\u003e. Genuine LCI\/Lippert OEM controller — direct replacement for X0 architecture slide-out systems.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Replace X0 with X0 Only\u003c\/h3\u003e\n\u003cp\u003eThese controller boards should \u003cstrong\u003eonly be replaced with the exact same board\u003c\/strong\u003e (i.e., X0 for X0). Different Lippert Unity board revisions are NOT interchangeable — verify your existing board matches the X0 designation before ordering.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Direct-Ship from Lippert — Standard Lead Time Applies\u003c\/h3\u003e\n\u003cp\u003eThis is a \u003cstrong\u003eLippert direct-ship item\u003c\/strong\u003e — expect standard Lippert 7-business-day lead time before shipment.\u003c\/p\u003e\n\n\u003ch3\u003eMulti-Function Slide-Out Control\u003c\/h3\u003e\n\u003cp\u003eThe Unity X0 assembly controls slide-out system operation — the brain that manages motor drive, sequencing, and system integration for compatible Lippert slide-out installations.\u003c\/p\u003e\n\n\u003ch3\u003eMade in the USA\u003c\/h3\u003e\n\n\u003ch3\u003eCross-Reference\u003c\/h3\u003e\n\u003cp\u003eManufacturer Reference: \u003cstrong\u003e25336\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003e1-Year Warranty\u003c\/h3\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Required\u003c\/h3\u003e\n\u003cp\u003eInvolves 12V DC electrical wiring and slide-out system integration. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e. Verify safe slide operation across the full extension\/retraction range after installation.\u003c\/p\u003e\n\n\u003ch3\u003eGenuine Lippert OEM\u003c\/h3\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Lippert (LCI) OEM\u003c\/strong\u003e Unity X0 controller assembly\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMulti-function slide-out control\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 801172\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Reference:\u003c\/strong\u003e 25336\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eX0 board — replace with X0 only\u003c\/strong\u003e (verify board designation before ordering)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect-ship from Lippert\u003c\/strong\u003e — standard lead time applies\u003c\/li\u003e\n  \u003cli\u003eMade in USA\u003c\/li\u003e\n  \u003cli\u003eBacked by 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Lippert (LCI)\u003c\/li\u003e\n  \u003cli\u003eSKU: 801172\u003c\/li\u003e\n  \u003cli\u003eManufacturer Reference: 25336\u003c\/li\u003e\n  \u003cli\u003eModel: Unity X0\u003c\/li\u003e\n  \u003cli\u003eType: Multi-Function Slide-Out Controller Assembly\u003c\/li\u003e\n  \u003cli\u003eBoard Compatibility: X0 only — NOT interchangeable with other Unity board revisions\u003c\/li\u003e\n  \u003cli\u003eCountry of Origin: USA\u003c\/li\u003e\n  \u003cli\u003eShipping: Direct-ship from Lippert (standard lead time applies)\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51582888935727,"sku":null,"price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/s-l1600_95.webp?v=1751419847"},{"product_id":"lippert-onecontrol-level-up-advantage-leveling-controller-807615","title":"Lippert OneControl Level Up Advantage Leveling Controller 807615 24999","description":"\u003cp\u003eNew OEM Leveling Controller\u003c\/p\u003e\n\u003cp\u003eThis unit supersedes: 241129, 425749, and 307272\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51599708651823,"sku":null,"price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/s-l1600-2025-08-11T150004.359_ccefb2ec-2de1-4420-a7b3-b65ea6c35dfd.webp?v=1754939132"},{"product_id":"onecontrol-gc-3-0-advantage-4pt-2021018954-27451-fifth-wheel-leveler-w-bt-assembly","title":"ONECONTROL GC 3.0 ADVANTAGE 4PT 2021018954 27451 FIFTH WHEEL LEVELER W\/BT ASSEMBLY","description":"\u003cp\u003eNew unit as shown\u003c\/p\u003e\n\u003cp\u003eComes with 1-year manufacturer warranty\u003c\/p\u003e\n\u003cp\u003eSKU: 2021018954\u003c\/p\u003e\n\u003cp\u003eMPN: 27451\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51654875545903,"sku":null,"price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/56CB7834-F5E9-4CAA-B933-A2BBB79E9A89.jpg?v=1753287733"},{"product_id":"onecontrol-gc-3-0-advantage-6pt-803279-25055-fifth-wheel-leveler-assembly","title":"ONECONTROL GC 3.0 ADVANTAGE 6PT 803279 25055 FIFTH WHEEL LEVELER ASSEMBLY","description":"\u003cp\u003eNew unit in manufacturer box (note there is no \"retail box\")\u003c\/p\u003e\n\u003cp\u003eSKU: 803279\u003c\/p\u003e\n\u003cp\u003eMPN: 25055\u003c\/p\u003e\n\u003cp\u003eOnly compatible with OCTP Version 3 or above\u003c\/p\u003e\n\u003cp\u003eComes with 1-year manufacturer warranty\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51654898123055,"sku":null,"price":583.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/803279_Lippert_ONECONTROLGC30ADVANTAGE6PTFIFTHWHEELLEVELERASSY_LevelingStabiliza_0_1_3.webp?v=1753288612"},{"product_id":"onecontrol-2-motor-velocity-sync-inwall-slide-control-assembly-option-1-17788a","title":"ONECONTROL 308958 2-MOTOR VELOCITY SYNC INWALL SLIDE CONTROL ASSEMBLY OPTION 1 17788A","description":"\u003cp\u003eNew controller from Lippert\u003c\/p\u003e\n\u003cp\u003eTypically paired with 236575 Motors\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51668319273263,"sku":null,"price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/308958_Lippert_ONECONTROL2MOTORVELOCITYSYNCINWALLSLIDECONTROLASSEMBLYOPTION1_Sli_0_1_2.webp?v=1753658779"},{"product_id":"lippert-schwintek-motor-in-wall-high-torque-287298-500-1","title":"Lippert Schwintek Slide-Out Motor | 287298 | High Torque | 500:1","description":"\u003cp\u003eRestore reliable slide-out operation to your heavier-duty Lippert Schwintek In-Wall RV slide-out system with the \u003cstrong\u003eLippert OEM Schwintek In-Wall High Torque Motor (Part #287298, 500:1)\u003c\/strong\u003e. This genuine LCI\/Lippert OEM motor is the high-torque drive component engineered for Schwintek slide-outs that need more pulling power than the standard 300:1 motor provides — heavier slide-outs, furniture-loaded slides, or installations where binding has caused standard-torque motors to struggle.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Genuine LCI\/Lippert OEM — NOT a Chinese Copy\u003c\/h3\u003e\n\u003cp\u003eOne thing worth being explicit about: this is a \u003cstrong\u003egenuine Lippert motor with an LCI serial number\u003c\/strong\u003e — not a Chinese aftermarket copy. The RV parts market is unfortunately flooded with cheap replicas of OEM Schwintek slide-out motors that often fail prematurely, don't drive properly, or damage your slide-out hardware over time. The 287298 motors we sell are \u003cstrong\u003ereal LCI\/Lippert units\u003c\/strong\u003e. If your previous \"replacement\" motor failed quickly, the OEM vs aftermarket distinction is likely a meaningful factor.\u003c\/p\u003e\n\u003ch3\u003eNeed the 5mm Shaft Variant?\u003c\/h3\u003e\n\u003cp\u003eFor older In-Wall installations that use a \u003cstrong\u003e5mm output shaft motor\u003c\/strong\u003e, order the \u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-in-wall%C2%AE-ig-42-motor-assembly-for-rv-slide-outs-5mm-240015\"\u003eLippert 240015 In-Wall IG-42GM 5mm Motor\u003c\/a\u003e instead. Verify shaft size before ordering — 5mm and 10mm motors are NOT interchangeable.\u003c\/p\u003e\n\u003ch3\u003eAbout These Motors — New OEM, Pulled from Disassembled Slides\u003c\/h3\u003e\n\u003cp\u003eThese motors are \u003cstrong\u003egenuine LCI\/Lippert units\u003c\/strong\u003e with an unusual sourcing path that translates to meaningful cost savings:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eNever installed in customer-sold RVs\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePulled from disassembled slides\u003c\/strong\u003e that were OEM manufacturing mistakes or bulk inventory\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM offloaded these units at auction\u003c\/strong\u003e rather than sending them to customers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWe part those slides out\u003c\/strong\u003e for resale of the individual components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou get genuine OEM Lippert factory quality at a price point typically below sourcing new-in-box motors directly from the supply chain.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Possible Minor Wear \/ Cylinder Discoloration\u003c\/h3\u003e\n\u003cp\u003eBecause these motors come from disassembled slides, the units may show \u003cstrong\u003eminor wear or discoloration on part of the cylinder\u003c\/strong\u003e. This is purely cosmetic and does NOT affect:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eMotor performance or function\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMechanical operation\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eService life\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMounting fit\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe mechanical and electrical components are unaffected — only visible cosmetic finish may show some wear. Since the motor is hidden inside the wall in typical Schwintek installations, cosmetic appearance is a non-issue for most buyers.\u003c\/p\u003e\n\n\u003ch3\u003e500:1 Gear Ratio — High Torque Output\u003c\/h3\u003e\n\u003cp\u003eThe 287298 features a \u003cstrong\u003e500:1 gear ratio\u003c\/strong\u003e — significantly higher torque output than the standard 300:1 Schwintek motor. The higher gear reduction means:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMore mechanical advantage\u003c\/strong\u003e at the drive shaft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMore pulling power\u003c\/strong\u003e for heavier loads\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBetter performance\u003c\/strong\u003e when binding or resistance is present\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduced strain\u003c\/strong\u003e on the motor under heavy load conditions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLonger service life\u003c\/strong\u003e in heavy-duty applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to Choose 500:1 Over Standard 300:1\u003c\/h3\u003e\n\u003cp\u003eCommon reasons to upgrade to the high-torque 500:1 variant:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavier slide-out\u003c\/strong\u003e — larger slides with more weight to move\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFurniture-loaded slides\u003c\/strong\u003e — couches, dinettes, beds that add substantial weight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRepeated standard-motor failures\u003c\/strong\u003e from binding or overload\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOriginal equipment used 500:1\u003c\/strong\u003e — match the original motor specification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAging slide mechanism with increased friction\u003c\/strong\u003e — extra torque overcomes wear-related resistance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer-spec high-torque application\u003c\/strong\u003e per the slide-out's design documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNeed the Standard 300:1 Torque Version Instead?\u003c\/h3\u003e\n\u003cp\u003eIf your slide-out is a standard weight installation that originally shipped with a standard-torque motor, you may not need this high-torque variant — the matching standard-torque replacement is the \u003ca href=\"https:\/\/thervsurplus.com\/products\/ig-42-10mm-schwintek-lippert-300-1-236575-slide-out-motor\"\u003eLippert Schwintek 300:1 IG-42 10mm Motor (Part #236575)\u003c\/a\u003e — same Schwintek In-Wall architecture, but with the standard 300:1 gear ratio. Match the motor's torque rating to your original specification or your slide-out's weight requirements.\u003c\/p\u003e\n\u003cp\u003eAlways verify against your original motor's part number or the slide-out manufacturer's specification when choosing between torque ratings — slide-out manufacturers specify the appropriate motor at design time, and replacements should match.\u003c\/p\u003e\n\n\u003ch3\u003eIn-Wall Compact Design\u003c\/h3\u003e\n\u003cp\u003eThe 287298 retains the standard Schwintek In-Wall \u003cstrong\u003ecompact form factor\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect drop-in replacement\u003c\/strong\u003e for the standard motor — no architectural modifications needed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSame mounting interface\u003c\/strong\u003e as standard 300:1 Schwintek motors\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact size\u003c\/strong\u003e fits within the standard In-Wall mounting envelope\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHidden installation\u003c\/strong\u003e — typical Schwintek installations conceal the motor inside the slide wall\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFor Lippert Schwintek In-Wall Slide-Out Systems\u003c\/h3\u003e\n\u003cp\u003eThe 287298 is specifically designed for \u003cstrong\u003eLippert Schwintek In-Wall slide-out systems\u003c\/strong\u003e — the architecture where drive motors and rack-and-pinion mechanism are concealed inside the slide-out walls. This is distinct from other Lippert slide-out architectures, such as Full Wall slide-out controllers like the \u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-368828-slide-out-cntrl-module-replaces-full-wall-kit-386185-140-1249s\"\u003e368828\u003c\/a\u003e, which serves a different system entirely.\u003c\/p\u003e\n\u003cp\u003eVerify your slide-out architecture before ordering — Lippert produces multiple slide-out systems, and motors are not interchangeable across the different architectures.\u003c\/p\u003e\n\n\u003ch3\u003eEasy Installation\u003c\/h3\u003e\n\u003cp\u003eThe 287298 is engineered for \u003cstrong\u003estraightforward replacement\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect drop-in fit\u003c\/strong\u003e on compatible Schwintek In-Wall installations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard mounting interface\u003c\/strong\u003e — no architectural modifications\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlug-and-play electrical\u003c\/strong\u003e connection on standard Schwintek wiring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDIY-friendly\u003c\/strong\u003e for owners comfortable with basic RV mechanical work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat This Motor Does\u003c\/h3\u003e\n\u003cp\u003eThe drive motor is the powered component that operates Schwintek In-Wall slide-outs:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrives slide extension\u003c\/strong\u003e — opens the slide-out from the wall\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrives slide retraction\u003c\/strong\u003e — pulls the slide back to the closed position\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProvides controlled motion\u003c\/strong\u003e via the integrated gear reduction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDelivers high torque output\u003c\/strong\u003e for heavier slide-out applications\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAllows one-touch operation\u003c\/strong\u003e from the slide-out control switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCommon Failure Symptoms\u003c\/h3\u003e\n\u003cp\u003eReasons to replace the Schwintek slide-out motor include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlide won't extend or retract\u003c\/strong\u003e when the switch is activated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor runs but slide doesn't move\u003c\/strong\u003e — internal gear failure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnusual grinding, squealing, or rumbling noises\u003c\/strong\u003e during operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlow, labored, or strained motion\u003c\/strong\u003e during extension\/retraction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor seizes\u003c\/strong\u003e — completely stops working\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntermittent operation\u003c\/strong\u003e — works sometimes, doesn't other times\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor overheats\u003c\/strong\u003e during operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard motor was undersized\u003c\/strong\u003e — upgrade to high-torque for adequate performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore assuming the motor has failed, rule out simpler issues — switch operation, wiring connections, control module function, battery voltage, fuses, or mechanical binding in the slide-out hardware. These can mimic motor failure symptoms. Our \u003ca href=\"https:\/\/thervsurplus.com\/blogs\/news\/rv-slide-out-moves-slowly-or-stuck\"\u003eRV Slide-Out Moves Slowly or Stuck troubleshooting guide\u003c\/a\u003e walks through the typical diagnostic path.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Recommended for Complex Cases\u003c\/h3\u003e\n\u003cp\u003eWhile the 287298 is engineered for direct replacement, slide-out motor replacement involves \u003cstrong\u003eworking with the slide-out mechanism, 12V DC electrical wiring, and potentially the slide rack-and-pinion drive system\u003c\/strong\u003e. For first-time installations or unfamiliar slide-out configurations, a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e can ensure proper alignment, electrical termination, and operational verification. After installation, verify smooth extension\/retraction across the full slide travel.\u003c\/p\u003e\n\n\u003ch3\u003e1-Year RV Surplus Warranty\u003c\/h3\u003e\n\u003cp\u003eThe 287298 is backed by our \u003cstrong\u003e1-year warranty with The RV Surplus\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eGenuine LCI \/ Lippert OEM\u003c\/h3\u003e\n\u003cp\u003eAs a genuine LCI (Lippert Components Inc.) factory replacement motor with verifiable LCI serial number, the 287298 delivers OEM-grade engineering and quality. Lippert is the proven manufacturer of Schwintek slide-out systems — these are the same high-torque motors that originally shipped in heavier-duty Schwintek installations.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine LCI \/ Lippert OEM\u003c\/strong\u003e Schwintek In-Wall high-torque slide-out motor with verifiable LCI serial number\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eNOT a Chinese aftermarket copy\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e500:1 gear ratio\u003c\/strong\u003e — high torque output for heavier-duty applications\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIn-wall compact design\u003c\/strong\u003e — direct drop-in fit on standard Schwintek mounting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-duty performance\u003c\/strong\u003e — engineered for heavier slide-outs and demanding applications\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eSmooth and durable operation\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eEasy installation\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard-torque sibling available:\u003c\/strong\u003e 300:1 variant (Part #236575) for typical slide-out applications\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePulled from disassembled OEM mistake\/bulk inventory slides\u003c\/strong\u003e — never sold to a customer\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMay show minor cosmetic cylinder wear\/discoloration\u003c\/strong\u003e — does not affect function or service life\u003c\/li\u003e\n  \u003cli\u003eBacked by 1-year RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Lippert (LCI)\u003c\/li\u003e\n  \u003cli\u003ePart Number: 287298\u003c\/li\u003e\n  \u003cli\u003eType: Schwintek In-Wall High-Torque Slide-Out Motor\u003c\/li\u003e\n  \u003cli\u003eGear Ratio: 500:1 (high torque)\u003c\/li\u003e\n  \u003cli\u003eCompatible System: Lippert Schwintek In-Wall slide-out architecture\u003c\/li\u003e\n  \u003cli\u003eNOT Compatible With: Other Lippert slide-out architectures (e.g., Full Wall slide-outs use different motors and controllers)\u003c\/li\u003e\n  \u003cli\u003eInstallation: Direct drop-in replacement on standard Schwintek In-Wall mounting\u003c\/li\u003e\n  \u003cli\u003eCondition: Genuine LCI OEM (pulled from disassembled OEM mistake\/bulk inventory slides; may show minor cosmetic cylinder wear\/discoloration)\u003c\/li\u003e\n  \u003cli\u003eStandard-Torque Sibling: Lippert Schwintek In-Wall 300:1 IG-42 10mm Motor (Part #236575)\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year RV Surplus warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51675395457327,"sku":null,"price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/IMG-0450.jpg?v=1754359066"},{"product_id":"lippert-ground-control-2-0-leveling-system-heavy-duty-drive-motor-241795-1a065012-02-03","title":"Lippert Ground Control 2.0 Leveling System Heavy-Duty Drive Motor #241795 1A065012-02-03","description":"\u003cp\u003eLippert is a leading manufacturer of leveling parts and accessories in RV industry, so we know leveling! Level your RV faster with a Lippert Tuson 5th wheel landing gear motor with dog \/ ram clutch. This unit replaces the motor on your Lippert Ground Control 2.0 electric leveling system. Consult your system's manual before purchasing.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDIRECT REPLACEMENT - This heavy-duty drive motor operates at 5,430 RPM and is a direct replacement for your original Lippert Ground Control 2.0 RV automatic leveling system, replacing a damaged or worn out motor\u003c\/li\u003e\n\u003cli\u003eECONOMICAL SOLUTION - Instead of replacing your entire system, our replacement parts help you save money by fixing only the malfunctioning component\u003c\/li\u003e\n\u003cli\u003eREPAIR-READY KIT - This package comes with the necessary components to facilitate an efficient and full repair for your system. It includes the electric motor with wire leads and includes a clutch\u003c\/li\u003e\n\u003cli\u003eWORRY-FREE INSTALLATION - Exact-match components from the manufacturer means a faster, easier, do-it-yourself installation without the unnecessary modifications or risks of cheap knockoffs\u003c\/li\u003e\n\u003cli\u003eRELIABILITY - Powered by a name campers and RVers trust, this genuine replacement part from Lippert is engineered and built with the same excellent quality you've come to expect from the leaders of the RV industry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a new unit with a scratch on the underside.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e We will honor a 1-year warranty from The RV Surplus.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51754993189167,"sku":null,"price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/241795_Lippert_LippertGroundControl20LevelingSystemHeavyDutyDriveMotor241795_Lev_0_1_1.webp?v=1754933032"},{"product_id":"lippert-697096-22368-rv-trailer-onecontrol-in-wall-slide-controller-assembly","title":"Lippert 697096 22368 RV Trailer OneControl In Wall Slide Controller Assembly","description":"\u003cp\u003eNew unit \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eOne year manufacturer warranty\u003c\/span\u003e\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51755447353647,"sku":null,"price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/697096_Lippert_ONECONTROLINWALLSLIDECONTROLLERASSEMBLY_SlideOutsLifts_0_1.webp?v=1754938983"},{"product_id":"onecontrol-pg-inwall-slide-controller-assembly-motorized-w-auto-program-700156","title":"ONECONTROL PG INWALL SLIDE CONTROLLER ASSEMBLY MOTORIZED W AUTO PROGRAM 700156","description":"\u003cp\u003eNew unit\u003c\/p\u003e\n\u003cp\u003ePark Brake Required\u003c\/p\u003e\n\u003cp\u003eOne year manufacturer warranty\u003c\/p\u003e\n\u003cp\u003eSupercedes: 366701 and 644097\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51805837558063,"sku":null,"price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/700156_Lippert_ONECONTROLPGINWALLSLIDECONTROLLERASSEMBLYMOTORIZEDWAUTOPROGRAM_Sl_0_1_1.webp?v=1755877514"},{"product_id":"onecontrol-pg-inwall-slide-controller-assembly-motorized-w-manual-program-700157-22385","title":"ONECONTROL PG INWALL SLIDE CONTROLLER ASSEMBLY MOTORIZED W MANUAL PROGRAM 700157 22385","description":"\u003cp\u003eNew unit\u003c\/p\u003e\n\u003cp\u003ePark Brake Required\u003c\/p\u003e\n\u003cp\u003eIncludes 1-year manufacturer warranty\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51805850272047,"sku":null,"price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/700157_Lippert_ONECONTROLPGINWALLSLIDECONTROLLERASSEMBLYMOTORIZEDWMANUALPROGRAM__0_1_1.webp?v=1755877647"},{"product_id":"lippert-ground-control-travel-trailer-leveling-controller-421483","title":"Lippert Ground Control Travel Trailer Leveling Controller #421483","description":"\u003cp\u003eNew unit\u003c\/p\u003e\n\u003cp\u003eGround Control TT Leveling Controller\u003c\/p\u003e\n\u003cp\u003eIncludes 1-year manufacturer warranty\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51805871702319,"sku":null,"price":629.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/FullSizeRender_455f54d2-778b-4dc1-838b-fc4b69a2c28f.heic?v=1757176013"},{"product_id":"replacement-22-1-2-left-rear-leg-for-lippert-ground-control-3-0-electric-leveling-system-hall-effect-jack-short-stroke-342610","title":"Replacement 22-1\/2\" Left Rear Leg for Lippert Ground Control 3.0 Electric Leveling System - Hall Effect Jack Short Stroke 342610","description":"\u003cp\u003eReplaces a left-side, short, rear leg for your Lippert Ground Control 3.0 automatic 6-point leveling system (LC675817). Includes mounting plate and attached foot plate.\u003cspan id=\"description-portion\" data-view-tracked=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"strong nobreak\"\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces 1 left-side, short, rear leg for your Lippert Components Ground Control 3.0 electric 6-point leveling system (LC675817)\u003c\/li\u003e\n\u003cli\u003eIncludes mounting plate and attached foot plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"strong nobreak\"\u003eSpecs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTotal lift: 12-1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall height:\n\u003cul\u003e\n\u003cli\u003eRetracted: 22-1\/2\"\u003c\/li\u003e\n\u003cli\u003eExtended: 35\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCapacity: 5,000 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51805875536175,"sku":null,"price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/download_2_053674f7-7054-41d5-b2f9-318ee6a49a31.png?v=1755878994"},{"product_id":"replacement-hydraulic-jack-assembly-for-lippert-level-up-rv-leveling-system-follow-leg-14-000-lb-8005413","title":"Replacement Hydraulic Jack Assembly for Lippert Level Up RV Leveling System - Follow Leg - 14,000 lb 8005413","description":"\u003cp\u003eNew unit\u003c\/p\u003e\n\u003cp\u003eFoot Pad Type: 9\" Round\u003c\/p\u003e\n\u003cp\u003eJack Stroke: 20\"\u003c\/p\u003e\n\u003cp\u003eWeight Capacity: 14,000 lb.\u003c\/p\u003e\n\u003cp\u003eSupercedes SKUs: 800541, 25712510, 25712610, 433467, 433469, 43346710, 43346910\u003c\/p\u003e\n\u003cp\u003eComes with 1-year manufacturer warranty\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51805883924783,"sku":null,"price":729.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/8005413_Lippert_LEVELHYD14KCYLBODY250INBORE2000INSTROKEW900INFPCLEAR_LevelingSta_0_1.webp?v=1755879443"},{"product_id":"replacement-22-1-2-right-rear-leg-for-lippert-ground-control-3-0-electric-leveling-system-428493","title":"Replacement 22-1\/2\" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System 428493","description":"\u003cp\u003eReplaces a right-side, short, rear leg for your Lippert Ground Control 3.0 automatic 6-point leveling system (LC675817). Includes mounting plate and attached foot plate.\u003c\/p\u003e\n\u003cp class=\"strong nobreak\"\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces 1 right-side, short, rear leg for your Lippert Components Ground Control 3.0 electric 6-point leveling system (LC675817)\u003c\/li\u003e\n\u003cli\u003eIncludes mounting plate and attached foot plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"strong nobreak\"\u003eSpecs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTotal lift: 12-1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall height:\n\u003cul\u003e\n\u003cli\u003eRetracted: 22-1\/2\"\u003c\/li\u003e\n\u003cli\u003eExtended: 35\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCapacity: 5,000 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51805889003823,"sku":null,"price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/download_3_232d5352-d029-438d-b36d-640fde96f82e.png?v=1755879854"},{"product_id":"lippert-368828-slide-out-cntrl-module-replaces-full-wall-kit-386185-140-1249s","title":"Lippert Slide-Out Control Module | 368828 | Replaces 386185\/140-1249S","description":"\u003cp\u003eRestore reliable slide-out operation to your RV with the \u003cstrong\u003eLippert 368828 Slide-Out Control Module\u003c\/strong\u003e. This genuine Lippert OEM replacement controller is the electronic brain that manages slide-out operation — receiving input from the slide-out switch and directing power to the drive motor for extension and retraction cycles. When the controller fails, the slide-out becomes non-functional regardless of motor health. The 368828 is the direct replacement for Lippert's Full Wall Slide-Out Controller Kit 386185 and 140-1249S.\u003c\/p\u003e\n\n\u003ch3\u003eDirect Replacement for Lippert Full Wall Slide-Out Controllers\u003c\/h3\u003e\n\u003cp\u003eThe 368828 is the \u003cstrong\u003edirect replacement for the Lippert Full Wall Slide-Out Controller Kit\u003c\/strong\u003e. It supersedes or replaces the following part numbers:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003e386185\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e140-1249S\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your existing controller documentation or label shows either of these part numbers, this 368828 is the current production replacement.\u003c\/p\u003e\n\n\u003ch3\u003eWhat This Module Does\u003c\/h3\u003e\n\u003cp\u003eThe slide-out control module is the electronic brain of your slide-out system:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReceives the operator command\u003c\/strong\u003e from the slide-out switch (extend or retract)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManages power to the drive motor\u003c\/strong\u003e — controlling current direction and timing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMonitors the system\u003c\/strong\u003e for proper operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProvides safety shutoff\u003c\/strong\u003e on certain fault conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the controller fails, the slide-out becomes non-functional even if the motor itself is healthy — you can't extend or retract until the controller is repaired or replaced.\u003c\/p\u003e\n\n\u003ch3\u003eCommon Failure Symptoms\u003c\/h3\u003e\n\u003cp\u003eCommon reasons to replace the slide-out control module include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlide-out unresponsive\u003c\/strong\u003e to switch input\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlide-out moves erratically\u003c\/strong\u003e or stops mid-cycle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwitch activates motor in only one direction\u003c\/strong\u003e — works extending but not retracting (or vice versa)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBurning smell\u003c\/strong\u003e or visible damage to the controller housing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntermittent operation\u003c\/strong\u003e — works sometimes, doesn't other times\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContinuity testing\u003c\/strong\u003e shows controller failure after wiring and motor have been ruled out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore assuming the controller has failed, rule out simpler issues — slide-out switch operation, wiring connections, motor function, fuses, and battery voltage. These can mimic controller failure symptoms. Our \u003ca href=\"https:\/\/thervsurplus.com\/blogs\/news\/rv-slide-out-moves-slowly-or-stuck\"\u003eRV Slide-Out Moves Slowly or Stuck troubleshooting guide\u003c\/a\u003e walks through the typical diagnostic path.\u003c\/p\u003e\n\n\u003ch3\u003eFlying Lead Configuration\u003c\/h3\u003e\n\u003cp\u003eThe 368828 ships with \u003cstrong\u003eflying leads\u003c\/strong\u003e — meaning the controller comes with exposed wire ends rather than a preinstalled connector. This gives technicians flexibility to match the connector style used in your specific installation, but does require electrical termination work as part of installation.\u003c\/p\u003e\n\n\u003ch3\u003eNew Unit with 1-Year Manufacturer Warranty\u003c\/h3\u003e\n\u003cp\u003eThe 368828 is a \u003cstrong\u003ebrand new unit\u003c\/strong\u003e — not refurbished or pulled from used inventory. Backed by a \u003cstrong\u003e1-year manufacturer warranty\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eMade in the USA\u003c\/h3\u003e\n\u003cp\u003eThe 368828 is \u003cstrong\u003emanufactured in the USA\u003c\/strong\u003e — a meaningful provenance credential for Lippert OEM RV components.\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Required\u003c\/h3\u003e\n\u003cp\u003eSlide-out control module installation involves \u003cstrong\u003eworking with the RV's 12V DC electrical system, motor control wiring, and slide-out switch integration\u003c\/strong\u003e. Improper installation can result in slide-out damage, electrical faults, or fire hazards. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e with experience working on Lippert slide-out systems. The flying lead configuration requires proper wire termination for safe and reliable operation.\u003c\/p\u003e\n\n\u003ch3\u003eGenuine Lippert OEM Replacement\u003c\/h3\u003e\n\u003cp\u003eAs a Lippert factory replacement part, the 368828 is built to original specifications for a precise drop-in fit on compatible Full Wall slide-out installations.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Lippert OEM\u003c\/strong\u003e slide-out control module\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect replacement\u003c\/strong\u003e for Lippert Full Wall Slide-Out Controller Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReplaces:\u003c\/strong\u003e 386185, 140-1249S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlying lead configuration\u003c\/strong\u003e — exposed wire ends for technician termination\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNew unit\u003c\/strong\u003e — not refurbished\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eBacked by 1-year manufacturer warranty\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Lippert\u003c\/li\u003e\n  \u003cli\u003ePart Number \/ SKU: 368828\u003c\/li\u003e\n  \u003cli\u003eType: Slide-Out Control Module \/ Controller\u003c\/li\u003e\n  \u003cli\u003eReplaces: Lippert Full Wall Slide-Out Controller Kit (Part #386185, 140-1249S)\u003c\/li\u003e\n  \u003cli\u003eApplication: Full Wall slide-out controller replacement\u003c\/li\u003e\n  \u003cli\u003eWire Configuration: Flying leads (no preinstalled connector)\u003c\/li\u003e\n  \u003cli\u003eQuantity in Package: 1\u003c\/li\u003e\n  \u003cli\u003eCountry of Origin: USA\u003c\/li\u003e\n  \u003cli\u003eCondition: New\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51805912727855,"sku":null,"price":1849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/368828_Lippert_ControlBoxwithFlyingLeads_SlideOutsLifts_0_1_1.webp?v=1755880779"},{"product_id":"lippert-ground-control®-2-0-6-point-5th-wheel-electric-jack-controller-276452","title":"Lippert Ground Control® 2.0 6-Point 5th Wheel Electric Jack Controller #276452","description":"\u003cp\u003eNew unit\u003c\/p\u003e\n\u003cp\u003eComes with 1-year warranty from the manufacturer.\u003c\/p\u003e\n\u003cp\u003ePlease allow 1-2 weeks for delivery direct from Lippert.\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51805957980463,"sku":null,"price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/276452_Lippert_LippertGroundControl206Point5thWheelElectricJackController276452__0_1_3.webp?v=1755881961"},{"product_id":"lippert-components-803280-onecontrol-gc-3-0-advantage-4pt-fifth-wheel-leveler-assy-25057-smart-home-technology","title":"Lippert Ground Control 3.0 Leveling Control Module | 803280 | USA","description":"\u003cp\u003eReplace the control module on your Lippert Ground Control 3.0 electric leveling system with the \u003cstrong\u003eLippert 803280 Replacement Control Module\u003c\/strong\u003e. Genuine Lippert OEM board — direct-fit replacement for the Ground Control 3.0 architecture.\u003c\/p\u003e\n\n\u003ch3\u003eFor Lippert Ground Control 3.0 Systems\u003c\/h3\u003e\n\u003cp\u003eReplaces the control module (358590) for Lippert Components \u003cstrong\u003eGround Control 3.0 electric leveling system\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eMounts in a compartment under the coach\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnects directly to 12V battery\u003c\/strong\u003e via wiring harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSupersedes Older Part Numbers\u003c\/h3\u003e\n\u003cp\u003eThe 803280 supersedes:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003e694656\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e304136\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eManufacturer Reference: 25057\u003c\/h3\u003e\n\n\u003ch3\u003eMade in the USA\u003c\/h3\u003e\n\n\u003ch3\u003e1-Year Warranty\u003c\/h3\u003e\n\n\u003ch3\u003e⚠️ Professional Installation Required\u003c\/h3\u003e\n\u003cp\u003eInvolves 12V DC electrical wiring and leveling system integration. Installation should be performed by a \u003cstrong\u003equalified RV service technician\u003c\/strong\u003e. Always verify safe leveling operation across the full sequence after installation.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGenuine Lippert OEM\u003c\/strong\u003e Ground Control 3.0 control module\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReplaces 358590\u003c\/strong\u003e control module\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupersedes:\u003c\/strong\u003e Lippert 694656 and 304136\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Reference:\u003c\/strong\u003e 25057\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eUnder-coach compartment mount\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect 12V battery connection\u003c\/strong\u003e via wiring harness\u003c\/li\u003e\n  \u003cli\u003eMade in USA\u003c\/li\u003e\n  \u003cli\u003eBacked by 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Lippert\u003c\/li\u003e\n  \u003cli\u003eSeries: Ground Control 3.0\u003c\/li\u003e\n  \u003cli\u003ePart Number \/ SKU: 803280\u003c\/li\u003e\n  \u003cli\u003eManufacturer Reference: 25057\u003c\/li\u003e\n  \u003cli\u003eSupersedes: Lippert 694656, 304136\u003c\/li\u003e\n  \u003cli\u003eReplaces Control Module: 358590\u003c\/li\u003e\n  \u003cli\u003eType: Ground Control 3.0 Electric Leveling System Control Module\u003c\/li\u003e\n  \u003cli\u003eMounting: Under-coach compartment\u003c\/li\u003e\n  \u003cli\u003ePower: 12V battery connection via wiring harness\u003c\/li\u003e\n  \u003cli\u003eOuter Diameter: 0.6875\"\u003c\/li\u003e\n  \u003cli\u003eCountry of Origin: USA\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51827996229935,"sku":null,"price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/803280_Lippert_ONECONTROLGC30ADVANTAGE4PTFIFTHWHEELLEVELERASSY_LevelingStabiliza_0_1_3.webp?v=1756690932"},{"product_id":"venture-8532-08j-18-1-lippert-lci-8910-81a-5800rpm-12vdc-slide-out-motor-new-pull-off-oem-168956-132682","title":"VENTURE | AP PRODUCTS 8532-08J 18:1 Lippert LCI 8910-81A 5800RPM 12VDC SLIDE OUT MOTOR NEW OEM 132682 117292","description":"\u003cp\u003eBrand new unit from closed Lippert plant\u003c\/p\u003e\n\u003cp\u003e2025 Manufacturing Date\u003c\/p\u003e\n\u003cp\u003eWe also have it with the drive shaft\u003ca href=\"https:\/\/thervsurplus.com\/products\/lippert-117292-venture-lci-133612-8532-08j-890-01k-014-133612-slide-out-w-drive-shaft\" title=\"Lippert 117292 Slide Out with Drive Shaft\"\u003e here!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Lippert Venture Actuator Slide Out Motor (132682) is a high-performance replacement motor designed for Lippert 2x2 and 2.5x2.5 electric through-frame slide-outs. Featuring a powerful 1\/2 horsepower motor, 5800 RPM speed, and an 18:1 gear ratio, this 12V DC, 30-amp motor ensures smooth and efficient operation. It is also compatible with Tuson Actuator systems for seamless integration.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Lippert 2x2 and 2.5x2.5 electric through-frame slide-outs\u003c\/li\u003e\n\u003cli\u003ePowerful 1\/2 HP motor with 5800 RPM for reliable performance\u003c\/li\u003e\n\u003cli\u003e12V DC, 30-amp power supply for efficient operation\u003c\/li\u003e\n\u003cli\u003e18:1 gear ratio for optimized torque and speed\u003c\/li\u003e\n\u003cli\u003eCompatible with Tuson Actuator systems\u003c\/li\u003e\n\u003cli\u003eDurable 2-1\/4 inch inner gear for long-lasting performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eLippert 2 X 2 And 2.5 X 2.5 Electric Through Frame Slide Outs\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eAmpere Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e30 Amp\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eVoltage Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e12 Volt\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eHorsepower: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1\/2 Horsepower\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDrive Type: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eCenter Drive\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eWith Wiring Harness Connector: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eYes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Venture","offers":[{"title":"Default Title","offer_id":51831722344751,"sku":null,"price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/s-l1600_45_b95b7356-514c-4a0e-b475-5f33d5c71434.webp?v=1756841181"},{"product_id":"lippert-one-control-unity-x2-773597-24608-assembly-control-board-module-camper","title":"Lippert One Control Unity X2 773597 24608 Assembly Control Board Module Camper","description":"\u003cp\u003eNew unit - out of production unit\u003c\/p\u003e\n\u003cp\u003eWe have all the cords for these units as well. They are sold as a set which you can find on this listing near the \"add to cart\" option.\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51876287545647,"sku":null,"price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/s-l1600-2025-09-23T134528.012.webp?v=1758649536"},{"product_id":"lippert-unity-one-control-x2-harness-set-762236-762234-762232-791872-791871-791873-791875","title":"Lippert Unity One Control X2 Harness Set 762236 762234 762232 791872 791871 791873 791875","description":"\u003cp\u003eThis is a full replacement harness set for the X2 unit.\u003c\/p\u003e\n\u003cp\u003eThese are new cords. You get one of each type: \u003cbr\u003e762236 762234 762232 791872 791871 791873 791875\u003cbr\u003e\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51876294164783,"sku":null,"price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/FullSizeRender_5c62f4d9-1b29-411c-abd0-c8c3e9593901.heic?v=1758650202"},{"product_id":"lippert-replacement-quick-level-touch-panel-for-rv-leveling-system-425306","title":"Lippert Replacement Quick Level Touch Panel for RV Leveling System #425306","description":"\u003cp\u003eNew unit with cord\/harness attached\u003c\/p\u003e\n\u003cp\u003eOEM product\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51876319658287,"sku":null,"price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/s-l1600-2025-09-23T140635.310.webp?v=1758650815"},{"product_id":"lippert-onecontrol-level-up-advantage-leveling-controller-807615-24999","title":"Lippert OneControl Level Up Advantage Leveling Controller 807615 24999 *","description":"\u003cp\u003eNew OEM Leveling Controller\u003c\/p\u003e\n\u003cp\u003eThis unit supersedes: 241129, 425749, and 307272\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51876433232175,"sku":null,"price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/FullSizeRender_97f1e6a6-a7db-44c9-b427-af6011a74966.heic?v=1758655348"},{"product_id":"lippert-4-pin-pigtail-harness-425585-rv-trailer","title":"Lippert 4 Pin Pigtail Harness 425585 RV Trailer","description":"\u003cp\u003eNew OEM Lippert unit\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51876443259183,"sku":null,"price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/s-l1600-2025-09-23T152612.893.webp?v=1758655599"},{"product_id":"lippert-7-3-0-one-control-touch-panel-assembly-w-bezel-screws-2022004552-28639","title":"Lippert 7\" 3.0 ONE CONTROL TOUCH PANEL ASSEMBLY w\/ Bezel \u0026 Screws 2022004552 28639 2022004534 28637 406347","description":"\u003cp\u003eNew OEM unit with Bezel and Screws from manufacturer case\u003c\/p\u003e\n\u003cp\u003eThese are very hard to find if a replacement is needed. They will sell out.\u003c\/p\u003e\n\u003cp\u003eThese have multiple part number options but are all the same.\u003c\/p\u003e\n\u003cp\u003eThis firmware version 5.\u003c\/p\u003e\n\u003cp\u003e2022004552 28639\u003c\/p\u003e\n\u003cp\u003e2022004534 28637\u003c\/p\u003e\n\u003cp\u003e406347\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51876473340207,"sku":null,"price":679.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/FullSizeRender_0ab8f777-0f4b-4b65-9c07-e14579948c05.heic?v=1758656413"},{"product_id":"lippert-ground-control-3-0-rv-auto-level-remote-rear-sensor-232201","title":"Lippert Ground Control 3.0 RV Auto-Level Remote Rear Sensor 5th Wheel #232201 14022-B","description":"\u003cp\u003eThe Lippert Auto-Level Remote Rear Sensor 232201 is the perfect addition to your RV. This sensor allows you to easily and accurately level your RV with the push of a button. Features include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003cli\u003eAccurate and reliable\u003c\/li\u003e\n\u003cli\u003eRemote control operation\u003c\/li\u003e\n\u003cli\u003eAuto level remote rear sensor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"productAttribute\"\u003e\n\u003cspan id=\"webcontent_0_row2_0_productDetailTabs_rptrAttributes_lblAttributeName_0\" class=\"attributeName\"\u003eCompatibility\u003c\/span\u003e:\u003cspan\u003e \u003c\/span\u003e\u003cspan id=\"webcontent_0_row2_0_productDetailTabs_rptrAttributes_lblAttributeValue_0\"\u003eLippert Electric Leveling Jack\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeartland Part Number - 0114813\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJayco Part Number - 0235875\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eKeystone RV Part Number - 350744\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51876914069807,"sku":null,"price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/232201_Lippert_LippertGroundControl30RVAutoLevelRemoteRearSensor232201_LevelingS_0_1.webp?v=1758675858"},{"product_id":"lippert-10-canbus-data-harness-331114-rv-trailer-10-foot-wire-harness","title":"Lippert 10' Canbus Data Harness 331114 RV Trailer 10 Foot Wire Harness 2 Pin","description":"\u003cp\u003eNew unit from manufacturer case pack\u003c\/p\u003e\n\u003cp\u003ePairs with LCI 3.0 Ground Control System amongst some other things\u003c\/p\u003e\n\u003cp\u003ePlease refer to picture of connectors\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51878019760431,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/8A98A35E-6D48-4A5A-8F2D-BD3241CF6898.jpg?v=1758730193"},{"product_id":"lippert-harness-canbus-power-connector-3-0-advantage-wire-cord-329080","title":"Lippert Harness CANBUS Power Connector 3.0 Advantage Wire Cord 329080 2 Pin","description":"\u003cp\u003eNew wire harness\/power connector cable from manufacturer case pack\u003c\/p\u003e\n\u003cp\u003eOften paired with LCI 3.0 Advantage Setups\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51878045483311,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/IMG-0580.heic?v=1758730832"},{"product_id":"lippert-333041-canbus-terminating-resistor-120-ohms-set-of-2","title":"Lippert 333041 CANBUS Terminating Resistor 120 Ohms - Set of 2","description":"\u003cp\u003eNew units from manufacturer case pack\u003c\/p\u003e\n\u003cp\u003eOften paired with LCI 3.0 Advantage products\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51878047777071,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/333041_Lippert_CanbusTerminatingResistor_LevelingStabilization_0_1_1.webp?v=1758731029"},{"product_id":"lippert-42mm-no-brake-slimrack-plus-12v-2025003475-slide-out-motor","title":"Lippert 42MM NO BRAKE Slimrack Plus 12V 2025003475 Slide Out Motor","description":"\u003cp\u003eNew unit with minor surface wear\u003c\/p\u003e\n\u003cp\u003eThese are very uncommon to find in the market.\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51878261489967,"sku":null,"price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/IMG-0582.heic?v=1758735009"},{"product_id":"lippert-ground-control-travel-trailer-remote-sensor","title":"Lippert OEM Ground Control Travel Trailer Remote Sensor 423094","description":"\u003cp\u003eNew unit from case pack\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51896584503599,"sku":null,"price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/423094_Lippert_LippertGroundControlTravelTrailerRemoteSensor_LevelingStabilizati_0_1_1.webp?v=1759434130"},{"product_id":"lippert-32623-2024017806-ground-control-controller-tt-lite-leveling-w-power-bluetooth","title":"Lippert OEM 32623 2024017806 Ground Control Controller TT Lite Leveling W\/ Power Bluetooth","description":"\u003cp\u003eNew unit from case pack\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51896593285423,"sku":null,"price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/s-l1600-2025-10-02T154452.152.webp?v=1759434311"},{"product_id":"lippert-replacement-35-brain-to-remote-sensor-wiring-harness-243688-rv-trailer","title":"Lippert OEM 35' Brain to Remote Sensor Wiring Harness 243688 RV Trailer","description":"\u003cp\u003e\u003cspan\u003eThis replacement Hall Effect RV sensor-to-brain wiring harness #243688 is for 4-point or 6-point control boards. It is a genuine Lippert replacement part, and it includes the harness only. The control box and sensor are not included.\u003c\/span\u003e\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51899102331183,"sku":null,"price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/243688_Lippert_LippertHallEffectSensortoControlBoardHarness35Long243688_Leveling_0_1_1_9eff9d3d-653e-4cf2-90f5-377cb5076b97.webp?v=1759522249"},{"product_id":"lippert-oem-6-pin-controller-to-motor-harness-30-male-to-female-229756","title":"Lippert OEM 6-Pin Controller-to-Motor Harness - 30' (Male-to-Female) 229756 RV","description":"\u003cp\u003e\u003cspan\u003eReplacement 30' Motor Harness for In-Wall® Slide-Outs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51899106033967,"sku":null,"price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/229756_Lippert_6PinControllertoMotorHarness30MaletoFemale_SlideOutsLifts_0_1_1.webp?v=1759522521"},{"product_id":"lippert-oem-hall-effect-replacement-left-rear-sensor-harness-306298","title":"Lippert OEM Hall Effect Replacement Left Rear Sensor Harness #306298","description":"\u003cp\u003e\u003cspan\u003eThis replacement RV leveling sensor wiring harness #306298 is for the Lippert Ground Control 3.0 5th wheel system. It is a genuine Lippert replacement part, and it includes the harness and spade connectors. The sensor is not included.\u003c\/span\u003e\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":51899107901743,"sku":null,"price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/306298_Lippert_LippertHallEffectReplacementLeftRearSensorHarness306298_LevelingS_0_1_3.webp?v=1759523022"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/collections\/s-l1600_91.webp?v=1756402985","url":"https:\/\/thervsurplus.com\/en-au\/collections\/slide-step-motors.oembed?page=4","provider":"The RV Surplus","version":"1.0","type":"link"}