{"product_id":"stabi-lite®-electric-sprinter-class-c","title":"STABI-LITE® Electric Stabilizer System | Sprinter Class C | Clamp-On No-Weld Install","description":"\u003cp\u003eEliminate coach lean and sway with the \u003cstrong\u003eSTABI-LITE® Electric Stabilizer System for Sprinter Class C\u003c\/strong\u003e — an electric screw-jack stabilizer that stops your Class B\/C motorhome from leaning when the slide extends and takes nearly all the sway out when someone walks around inside. This is a \u003cstrong\u003estabilizer, not a leveler\u003c\/strong\u003e: motor-driven screw jacks steady the coach rather than lift it. Available at The RV Surplus.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment critical:\u003c\/strong\u003e Verify compatibility before ordering. Email \u003ca href=\"mailto:getlevel@eqsystems.us\"\u003egetlevel@eqsystems.us\u003c\/a\u003e or call EQ Systems at \u003cstrong\u003e800-846-9659\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003e⭐ Stops Slide-Out Lean and Coach Sway\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEliminates coach lean\u003c\/strong\u003e when the slide is extended\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEliminates nearly all sway\u003c\/strong\u003e from movement inside the coach\u003c\/li\u003e\n  \u003cli\u003eAdjustable lifting force per leg brings a slide-out coach to a more level state\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e⭐ Clamp-On Install — No Welding, No Drilling\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eChassis-specific design reduces installation time\u003c\/li\u003e\n  \u003cli\u003eClamp-style mount — no welding or drilling required\u003c\/li\u003e\n  \u003cli\u003eSprinter version uses box-frame brackets (see mount spacing print)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e⭐ Low-Profile, Lightweight\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-profile design needs less height than traditional systems\u003c\/li\u003e\n  \u003cli\u003eComplete system weight \u003cstrong\u003eunder 80 lbs\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eOne-touch automatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's In The System (8450AM)\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo stabilizer jacks and risers\u003c\/li\u003e\n  \u003cli\u003eClamping mounts for each stabilizer assembly\u003c\/li\u003e\n  \u003cli\u003eAll necessary mounting hardware\u003c\/li\u003e\n  \u003cli\u003eComplete system wire harnesses\u003c\/li\u003e\n  \u003cli\u003eSystem controller and switch pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHarnesses and Mounting\u003c\/h3\u003e\n\u003cp\u003eKit includes two controller-to-motor harnesses at 7 ft and 12 ft, a 16 ft controller-to-switch-panel harness, an 8 ft controller-to-battery harness, and a 40A circuit breaker for the battery connection. The controller mounts close to the battery — in a sealed baggage compartment, cabinet, or under the dash. \u003cstrong\u003eThe switch panel and controller are NOT weather resistant\u003c\/strong\u003e and must go in protected areas. Motor harnesses are color-coded: gray\/pink for leg 1 and purple\/brown for leg 2.\u003c\/p\u003e\n\n\u003ch3\u003eSafety Interlocks\u003c\/h3\u003e\n\u003cp\u003eOne or more interlocks \u003cstrong\u003emust be connected\u003c\/strong\u003e so that extend is denied with the ignition key on or the park brake released. Only one is required to disable extension.\u003c\/p\u003e\n\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eThe leg is a screw jack — screw and nut must be kept clean and dry. Wash with a wet rag or mild detergent — \u003cstrong\u003enever a pressure washer\u003c\/strong\u003e. Don't spray cleaner heavily onto the motor gearbox. Lubricate pivot points and screw\/nut with \u003cstrong\u003edry film silicone or PTFE spray only\u003c\/strong\u003e. Oily\/greasy lubricants attract dirt and cause screw and nut problems.\u003c\/p\u003e\n\n\u003ch3\u003eService Parts\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-ca\/products\/stabi-lite-leg-assembly\"\u003e\u003cstrong\u003eLeg Assembly #7588\u003c\/strong\u003e\u003c\/a\u003e — ~16½\" of travel (Sprinter version uses box-frame brackets)\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-ca\/products\/harness-stabi-lite-motor-w-connector-added\"\u003e\u003cstrong\u003eMotor and Gearbox Assembly #6836\u003c\/strong\u003e\u003c\/a\u003e — motor not sold separately from gearbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/eqsystems.us\/cdn\/shop\/files\/7589T-7588-STABI-LITE-SPRINTER-BOX-FRAME-MT-DIMS-TRIPLE-E.pdf\" target=\"_blank\"\u003eMount Spacing Print, Sprinter Box Frame Mount with 7588 Leg (PDF)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/eqsystems.us\/cdn\/shop\/files\/EQ011R1-STABI-LITE-Installation-Manual.pdf\" target=\"_blank\"\u003eSTABI-LITE Installation Manual, EQ011R1 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/eqsystems.us\/cdn\/shop\/files\/Stabi-Lite-Maint-Troubleshooting-TM.pdf\" target=\"_blank\"\u003eSTABI-LITE and Level-Lite Maintenance and Troubleshooting Guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOther STABI-LITE Options\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-ca\/products\/stabi-lite-electric-class-c-ford-e-350-e-450-chevrolet-c5500\"\u003e\u003cstrong\u003eSTABI-LITE Electric — Ford E-350\/E-450\/Chevy C5500\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e1-Year Warranty\u003c\/h3\u003e\n\u003cp\u003eBacked by EQ Systems' \u003cstrong\u003e1-year manufacturer warranty\u003c\/strong\u003e. Check your operation manual for full terms.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: EQ Systems\u003c\/li\u003e\n  \u003cli\u003eModel: STABI-LITE® Electric Stabilizer\u003c\/li\u003e\n  \u003cli\u003eSKU: 8450AM\u003c\/li\u003e\n  \u003cli\u003eFitment: Sprinter Class B\/C chassis\u003c\/li\u003e\n  \u003cli\u003eType: Electric screw-jack stabilizer (NOT a leveler)\u003c\/li\u003e\n  \u003cli\u003eConfiguration: 2 legs\u003c\/li\u003e\n  \u003cli\u003eLeg Travel: ~16½\"\u003c\/li\u003e\n  \u003cli\u003eSystem Weight: Under 80 lbs\u003c\/li\u003e\n  \u003cli\u003eInstallation: Clamp-on box-frame brackets (no welding\/drilling)\u003c\/li\u003e\n  \u003cli\u003ePower: 12V DC with 40A circuit breaker\u003c\/li\u003e\n  \u003cli\u003eController: Non-weather-resistant (install in protected area)\u003c\/li\u003e\n  \u003cli\u003eLubricant: Dry film silicone or PTFE spray ONLY\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EQ Systems","offers":[{"title":"Default Title","offer_id":58472494989615,"sku":"8450AM","price":1646.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/7663\/0063\/files\/8450AM-RVU-scaled.webp?v=1789494556","url":"https:\/\/thervsurplus.com\/en-ca\/products\/stabi-lite%c2%ae-electric-sprinter-class-c","provider":"The RV Surplus","version":"1.0","type":"link"}