Dometic Hydro Flame 12V Furnace Blower Motor | 30131 | 8516/8520

Restore reliable furnace airflow with the Dometic Hydro Flame 30131 OEM RV 12V Furnace Blower Motor. Genuine Dometic OEM dual-shaft blower motor — drives both the blower wheel and combustion air wheel. 12V DC, 4.4A full load. For Dometic Hydro Flame 8516 and 8520 series furnaces.

What This Motor Does

The furnace motor is the dual-shaft drive component attached to both the blower wheel AND the combustion air wheel. When the control board sends power:

• Motor starts operating and rotates the drive shafts
• Blower wheel circulates heated air through the coach ductwork
• Combustion air wheel provides intake air for the burner and vents exhaust

When the motor fails, symptoms typically include no airflow through vents, loud grinding/squealing operation, furnace shutting off shortly after ignition (safety limit trips due to no airflow), or slow blower ramp-up.

⚠️ Correct Motor Size is Critical

Important sizing note: motor size and RPM correspond directly to the furnace BTU/hr rating — installing an incorrect-size motor will cause furnace performance issues or safety fault trips. Verify your existing furnace model matches the compatibility list before ordering.

Compatible Dometic Hydro Flame Furnaces

Direct replacement blower motor for:

• 8516-I
• 8516-II
• 8520-I
• 8520-II

Related Dometic Hydro Flame Blower Motors — Different Model Coverage

• Dometic Hydro Flame 30131 (this listing) — for 8516-I/II and 8520-I/II (4.4A)
• Dometic Hydro Flame 30132 120V AC Blower Motor — for 8935-AC/8940-AC Park Model (3.4A)
• Dometic Hydro Flame 30133 12V DC Blower Motor — for 8525-IV and 8531-IV (7.6A)

Related Dometic Atwood Furnace Components

If you're servicing an Atwood/Dometic Hydro Flame furnace, related parts:

• Dometic Atwood 31501 Hydro Flame Igniter Control Board — DC — 12V ignition control board
• Dometic Atwood 31098 Hydro Flame Gas Valve — dual-solenoid gas valve

Physical Specifications

Motor Body:

• 3" diameter × 2-7/8" long

Shaft #1:

• 1-15/16" long × 5/16" diameter

Shaft #2:

• 1-1/8" long × 5/16" diameter

Wire Lengths:

• Red wire: 4"
• Black wire: 4"

Electrical Specifications

• Power Source: 12V DC
• Full Load Amps: 4.4A

Cross-Reference Part Numbers

• Part Number: 30131
• Part # on Motor: 33219

⚠️ Professional Installation Recommended

Motor replacement involves furnace disassembly, careful handling of both the blower wheel and combustion air wheel, and reassembly with proper alignment for balanced operation. Installation should be performed by a qualified RV service technician unless you have prior experience with Atwood/Dometic Hydro Flame furnace service.

Limited 1-Year Manufacturer Warranty

Genuine Dometic OEM

Key Features

• Genuine Dometic OEM Hydro Flame RV furnace blower motor
• Part number: 30131 (Part # on motor: 33219)
• Dual-shaft design — drives blower wheel AND combustion air wheel
• 12V DC, 4.4A full load
• For Dometic Hydro Flame furnaces: 8516-I, 8516-II, 8520-I, 8520-II
• Motor body: 3" diameter × 2-7/8" long
• Backed by limited 1-year manufacturer warranty

Specifications

• Brand: Dometic (Hydro Flame)
• Part Number: 30131
• Part # on Motor: 33219
• Type: RV Furnace Blower Motor (Dual-Shaft)
• Power Source: 12V DC
• Full Load Amps: 4.4A
• Compatible Furnace Models: Dometic Hydro Flame 8516-I, 8516-II, 8520-I, 8520-II
• Motor Body Dimensions: 3" diameter × 2-7/8" long
• Shaft #1: 1-15/16" long × 5/16" diameter
• Shaft #2: 1-1/8" long × 5/16" diameter
• Red Wire Length: 4"
• Black Wire Length: 4"
• Warranty: Limited 1-year manufacturer warranty