Dometic 9200 Awning Roller Tube End Cap | 3316605-U | R/H | Black

Restore or repair your Dometic 9200 Series awning with the Dometic 3316605-U OEM 9200 Awning Roller Tube Right-Hand End Cap — Black. Genuine Dometic OEM replacement end cap that attaches to the roller tube with three rivets — provides the mounting point for the awning motor at the right-hand end of the roller tube.

Prefer White Instead?

Also available in white as the Dometic 3316605-B 9200 R/H End Cap — White. Same construction and fitment — white finish for lighter awning hardware color schemes.

What This Does

The roller tube end cap is the mounting interface between your Dometic 9200 awning roller tube and the awning motor. When the original end cap cracks, corrodes, or loses its rivet holes, this replacement lets you rebuild the roller tube without replacing the entire awning assembly.

⚠️ Right-Hand Position ONLY

This end cap is engineered specifically for the right-hand end of the roller tube (viewed from behind the awning, looking outward). If your failed end cap is on the left-hand end, this is not the correct part — verify orientation before ordering.

⚠️ Motor NOT Included

This listing is for the end cap only. The awning motor is sold separately.

Dimensions

• Outside Diameter: Approx. 3-3/4"
• Inside Diameter: Approx. 3-5/8"

Attaches with 3 Rivets

Riveted attachment to the roller tube — rivets are included. Standard aluminum awning rivets required (source separately).

⭐ 9200 Series Compatibility

Engineered specifically for the Dometic 9200 Series awning platform. Compatible with:

Dometic 9200 Hardware:

• 8962001.400U
• 8962002.400U
• 8962003.400U
• 8964012.400U

Dometic 9200 Roller Tubes:

• 925xx series
• 926xx series
• 927xx series

⚠️ 9200 Series ONLY — NOT Compatible with 9100 Series

Critical compatibility note: the 9200 Series uses different tube dimensions than the 9100 Series. This end cap fits ONLY 9200 Series roller tubes (925/926/927 tube series). It is NOT compatible with 9100 Series roller tubes (915/917/910 series). Verify your awning series before ordering.

Black Finish

Cross-Reference Part Numbers

• Part Number: 3316605-U

⚠️ Professional Installation Recommended

End cap replacement requires drilling out the original rivets, aligning the new cap correctly with the motor mounting orientation, and re-riveting to the roller tube. Installation should be performed by a qualified RV service technician unless you have prior experience with awning roller tube service.

Genuine Dometic OEM

Key Features

• Genuine Dometic OEM 9200 awning roller tube end cap
• Part number: 3316605-U
• Position: Right-hand end
• For Dometic 9200 Series awnings ONLY
• NOT compatible with 9100 Series (different tube dimensions)
• Motor mounting interface — motor sold separately
• 3-rivet attachment
• Outside diameter: ~3-3/4"
• Inside diameter: ~3-5/8"
• Compatible hardware: 8962001.400U, 8962002.400U, 8962003.400U, 8964012.400U
• Compatible tubes: 925xx, 926xx, 927xx
• Black finish

Specifications

• Brand: Dometic
• Part Number: 3316605-U
• Type: Awning Roller Tube End Cap
• Position: Right-Hand (R/H)
• Compatible Series: Dometic 9200 Series awning
• NOT Compatible With: Dometic 9100 Series (different tube dimensions)
• Compatible Hardware: 8962001.400U, 8962002.400U, 8962003.400U, 8964012.400U
• Compatible Roller Tubes: 925xx, 926xx, 927xx
• Outside Diameter: Approx. 3-3/4"
• Inside Diameter: Approx. 3-5/8"
• Attachment: 3 rivets 
• Motor: NOT included
• Color: Black