Lippert Level Up Brain Box Controller | 807615 | 24999 | OEM

Restore automatic leveling control with the Lippert OneControl Level Up Advantage Leveling Controller — Brain Box (SKU 807615 / MPN 24999). Genuine Lippert OEM replacement brain box controller for Level Up automatic leveling systems. The central processing unit that interprets sensor input, coordinates hydraulic jack actuation, and communicates with your in-cab control panel. Non-wireless design for wired Level Up configurations.

What This Controller Does

The brain box is the nerve center of the Level Up system. It:

• Interprets leveling sensor (inclinometer) input to determine required jack adjustments
• Coordinates hydraulic jack actuation — extend, retract, sequencing
• Monitors jack position and travel limits
• Communicates with in-cab control panel
• Drives valve/motor outputs for individual jack control

Common Symptoms of Brain Box Failure

If you're seeing any of these symptoms, the brain box is likely the culprit:

• Unresponsive controls
• Error codes on the display
• Jacks running continuously
• Control panel shows power but jacks won't move
• Auto-level cycle starts then immediately stops
• One or more jacks run out of sequence
• System reports a fault code immediately after power-up

⚠️ Level Up Systems Only — NOT Ground Control

This controller is engineered specifically for the Level Up platform. It is NOT compatible with Lippert Ground Control electric leveling systems. Installing on an incompatible system may damage the controller and the leveling system.

If unsure which system you have, look for the "Level Up" label on your in-cab panel or junction box, or check your owner's documentation.

Companion Components

If you're diagnosing broader Level Up system issues:

• Lippert Level Up Follow Leg Hydraulic Jack (8005413) — replaces individual failed jacks (14,000 lb capacity)
• Lippert Quick Level Touch Panel (425306) — if the in-cab touch panel itself has failed (cross-platform panel that also works with Level Up)

Supersedes These Earlier SKUs

• 241129
• 425749
• 307272

If your existing controller or parts documentation references any of these older part numbers, the 807615 is the current direct replacement.

⚠️ Non-Wireless Configuration

This controller is designed for wired Level Up system configurations. It does NOT add or require wireless/Bluetooth remote capability.

OEM Fit and Function

Genuine Lippert replacement — designed to match the original controller exactly:

• Same pinout
• Same mounting footprint
• No modifications needed

Installation Overview

1. Disconnect shore power and verify all jacks are retracted before beginning
2. Locate the existing brain box — typically mounted in a basement compartment or under-chassis bracket near the leveling system pump or valve block
3. Label and photograph all wiring harness connections before unplugging
4. Remove the old controller from its mounting bracket
5. Mount the new 807615 controller using the included flat brackets and hardware
6. Reconnect all harness plugs in their original positions
7. Restore power and perform a system initialization or auto-level cycle to verify operation

Note: Some Level Up installations may require a system re-calibration after controller replacement. Refer to Lippert's Level Up setup procedure for your specific system generation.

⭐ Maintenance Tip — Inspect Harness Before Reinstall

While the controller is out, inspect the wiring harness for chafed insulation, corrosion at connector pins, and moisture intrusion in the connector bodies. Corroded connectors are a common cause of controller damage — a compromised harness can take out a new unit if not addressed before reinstallation.

Physical Specifications

• Width: 1-5/16"
• Height: 3-5/6"
• Length: 5-1/2"
• Weight: 1 lb
• Color: Black

Cross-Reference Part Numbers

• SKU: 807615
• MPN: 24999
• Supersedes: 241129, 425749, 307272

What's Included

• Lippert 807615 Brain Box Controller (1x)
• Flat mounting brackets
• Mounting fasteners

⚠️ Direct-Ship from Lippert — Standard Lead Time Applies

This is a Lippert direct-ship item — expect standard Lippert lead time before shipment.

⚠️ Professional Installation Recommended

Installation involves 12V DC electrical wiring, hydraulic system integration, and post-install calibration. Wiring harness connectors must be reconnected exactly as originally installed — incorrect connections can damage the new controller immediately upon power-up. Installation should be performed by a qualified RV service technician familiar with Lippert Level Up systems.

1-Year Manufacturer Warranty

Genuine Lippert OEM

Key Features

• Genuine Lippert (LCI) OEM Level Up Advantage brain box controller
• SKU: 807615
• MPN: 24999
• For ALL Lippert Level Up leveling systems
• Non-wireless — for wired Level Up configurations
• NOT compatible with Lippert Ground Control electric leveling systems
• Supersedes: 241129, 425749, 307272
• Includes flat mounting brackets + fasteners
• Compact 5-1/2" × 3-5/6" × 1-5/16", 1 lb, black
• Direct-ship from Lippert — standard lead time applies
• New unit
• Backed by 1-year manufacturer warranty

Specifications

• Brand: Lippert (LCI)
• Series: OneControl Level Up Advantage
• SKU: 807615
• MPN: 24999
• Supersedes: 241129, 425749, 307272
• Type: Leveling System Brain Box Controller
• Compatible Systems: All Lippert Level Up leveling systems
• Wireless Capable: No (wired configurations only)
• NOT Compatible With: Lippert Ground Control electric leveling systems
• Width: 1-5/16"
• Height: 3-5/6"
• Length: 5-1/2"
• Weight: 1 lb
• Color: Black
• Included: Controller, flat mounting brackets, mounting fasteners
• Condition: New
• Shipping: Direct-ship from Lippert (standard lead time applies)
• Warranty: 1-year manufacturer warranty