EQ Systems 12×12 Foot Pad #7820 | For Leg Switch Jacks | SL 18 (7234) with Switch | 17,500 lb

Replace a worn, bent, or missing 12×12 inch foot pad on your EQ Systems hydraulic jack fitted with a plunger-style leg switch with the EQ Systems 12×12 Foot Pad for Leg Switch (Part 7820). Supplied with the bolt. Version for jack legs WITH a leg switch — a different pad from the one used on legs without a switch. Available at The RV Surplus.

⭐ Fits This SL Jack (with Leg Switch)

• SL 18 (7234) — leg with switch, 22⅛" body, 11.5" foot width — 17,500 lb capacity

⭐ Identifying the Right Pad

Measure your existing pad before ordering. An octagon pad is measured across the flats; a round pad across the diameter. Then confirm the jack:

• Body length = fixed outer body of jack, measured with jack retracted
• Plate/bracket position = measured from closed end of body; positive toward foot, negative past closed end

⚠️ Replace Damaged Pads Promptly

• Missing foot → won't operate the switch at all
• Bent or distorted foot → may not activate properly
• Foot bent upward → can damage or destroy the switch

Documents

• Jack Replacement Cylinder and Foot Identification Chart (PDF)
• Required Maintenance Items for EQ Hydraulic Jacks & Slide Systems (PDF)

Other Foot Pads

• 7×7 Foot Pad #70385 — SL 11/12/13 no leg switch
• 10×10 Foot Pad #7818 — SL 15 with screw
• 10×10 Foot Pad #7849 — SL 14/16/24 no leg switch
• 10×10 Foot Pad #7819 — SL 12/14/16 WITH leg switch
• 12×12 Foot Pad #7821 — SL 18/24 without leg switch

90-Day Warranty

Backed by EQ Systems' 90-day replacement part warranty. Check documentation for full terms.

Specifications

• Brand: EQ Systems
• Model: 12×12 Foot Pad with Bolt (for Leg Switch)
• SKU: 7820
• Dimensions: 12" × 12" square
• Included: Bolt
• For: Jack legs WITH plunger-style leg switch
• Fits: SL 18 (7234) — 17,500 lb capacity
• Warranty: 90-day replacement part warranty