Lippert 10' CAN Bus Data Harness | 331114 | 2-Pin | OEM

Extend or repair your OneControl CAN bus wiring with the Lippert 10' CAN Bus Data Harness (SKU 331114). Genuine Lippert OEM 10-foot 2-pin wire harness — pairs with the Ground Control 3.0 system among other OneControl-connected components. New from manufacturer case pack.

What This Harness Does

The CAN bus data harness carries network communication signals between OneControl modules — enabling the various control modules, touch panels, and sensors in your OneControl-based RV system to communicate with each other.

Need the Power Connector Instead?

Data vs power — these are NOT interchangeable. If you need the power connector version (not the data-signal harness), see the Lippert CAN Bus Power Connector Harness (329080). Same 2-pin configuration, different function.

Need CAN Bus Termination?

Proper CAN bus operation requires 120-ohm terminating resistors at each end of the network. See the Lippert 120-Ohm CAN Bus Terminating Resistors — Set of 2 (333041).

10-Foot Length, 2-Pin Connector

• Length: 10 feet
• Connector: 2-pin

Please refer to product photos to confirm connector match with your existing installation.

Pairs with LCI Ground Control 3.0 (and Other Systems)

Primary use is with the Lippert Ground Control 3.0 automatic leveling system, but the CAN bus data harness architecture is shared across other OneControl-connected components as well. Verify connector match before ordering.

Related Ground Control 3.0 Components

If you're servicing a Ground Control 3.0 system:

• Ground Control 3.0 Advantage 4-Point Controller (2021018954 / MPN 27451)
• Ground Control 3.0 Advantage 6-Point Controller (803279 / MPN 25055)
• Ground Control 3.0 Auto-Level Rear Sensor (232201 / 14022-B)

New from Manufacturer Case Pack

Sourced new from the manufacturer case pack.

Cross-Reference Part Numbers

• SKU: 331114

⚠️ Verify Connector Match Before Ordering

Please refer to product photos to confirm the connector shape and pin configuration matches your existing installation before ordering.

Genuine Lippert OEM

Key Features

• Genuine Lippert (LCI) OEM CAN bus data harness
• SKU: 331114
• 10-foot length
• 2-pin connector
• Pairs with LCI Ground Control 3.0 system and other OneControl components
• New from manufacturer case pack

Specifications

• Brand: Lippert (LCI)
• SKU: 331114
• Type: CAN Bus Data Harness
• Length: 10 feet
• Pin Count: 2
• Compatible Systems: Lippert Ground Control 3.0 (and other OneControl-connected components)
• Condition: New (from manufacturer case pack)