Lippert CAN Bus Terminating Resistors | 333041 | 120 Ohm | Set of 2

Terminate your OneControl CAN bus network properly with the Lippert 120-Ohm CAN Bus Terminating Resistors — Set of 2 (SKU 333041). Genuine Lippert OEM 120-ohm terminating resistors for OneControl CAN bus installations. Often paired with LCI 3.0 Advantage products. New from manufacturer case pack.

What These Resistors Do

CAN bus networks require terminating resistors at each end of the bus to prevent signal reflection that causes communication errors. Without proper termination:

• Signal reflection corrupts data transmission
• Modules fail to communicate reliably
• Intermittent faults appear that are hard to diagnose
• System-wide performance degrades

Two resistors are required — one at each end of the CAN bus network. This is why they ship as a matched pair.

⭐ Set of 2 — Proper Termination Requires Both Ends

Each set includes 2 terminating resistors — enough to properly terminate a complete CAN bus network (one at each end).

120-Ohm Standard CAN Bus Impedance

Standard 120-ohm impedance matches the characteristic impedance of CAN bus wiring. Correct value for OneControl CAN bus installations.

Often Paired with LCI 3.0 Advantage Products

Primary use is with Lippert Ground Control 3.0 Advantage automatic leveling systems and other OneControl 3.0 Advantage components. Also broadly applicable to any Lippert CAN bus network requiring termination.

Related OneControl 3.0 Advantage Components

If you're servicing a Ground Control 3.0 Advantage system:

• Ground Control 3.0 Advantage 4-Point Controller (2021018954 / MPN 27451)
• Ground Control 3.0 Advantage 6-Point Controller (803279 / MPN 25055)
• Lippert 10' CAN Bus Data Harness (331114)
• Lippert CAN Bus Power Connector Harness (329080)

Cross-Reference Part Numbers

• SKU: 333041

Genuine Lippert OEM

Key Features

• Genuine Lippert (LCI) OEM CAN bus terminating resistors
• SKU: 333041
• Set of 2 — proper CAN bus termination requires both ends
• 120-ohm impedance — standard CAN bus value
• Often paired with LCI 3.0 Advantage products
• New from manufacturer case pack

Specifications

• Brand: Lippert (LCI)
• SKU: 333041
• Type: CAN Bus Terminating Resistors
• Impedance: 120 ohms
• Quantity per Set: 2
• Compatible Systems: Lippert OneControl CAN bus networks (Ground Control 3.0 Advantage and related)
• Condition: New (from manufacturer case pack)