Lippert
Lippert 387874 Power Stabilizer Extend/Retract Switch | IP66 Rocker
Lippert 387874 Power Stabilizer Extend/Retract Switch | IP66 Rocker
Couldn't load pickup availability
Replace a failed or missing extend/retract control on your Lippert electric stabilizer jack system with the Lippert Power Stabilizer Extend/Retract Switch (Part 387874) — an IP66-rated waterproof rocker switch with wiring harness included. Direct exact-replacement part. Available at The RV Surplus.
⭐ What's In The Box
- (1) Rocker-style extend/retract switch
- Wiring harness
- ⚠️ Installation hardware NOT included — reuse existing or source separately
⭐ Key Features
- IP66-rated waterproof — stands up to dust and heavy water spray, suitable for exterior mounting
- Simple rocker operation — press up to extend, press down to retract
- Exact replacement — plug-and-play with the included harness
- DIY-friendly install for anyone comfortable with basic 12V wiring
⭐ Part Number History
This switch supersedes two older Lippert part numbers. All three refer to functionally the same control:
- 387874 (current — this listing)
- Supersedes: 242409
- Supersedes: 344484
⭐ OEM Cross-References
Same switch ships into coaches under several brand-specific part numbers:
- Heartland: 0270491
- Jayco: 0237679
- Keystone RV: 490960
- Winnebago: 201431-01-000
-
Back of switch label: AT141-121
If your dealer or parts list quoted any of these, this is the correct switch.
⚠️ Before Calling It a Switch Failure
If your stabilizers won't run, work through the basics first — switches are not usually the problem:
- Check battery voltage at the switch with a multimeter — a weak battery reads as a failing switch
- Inspect wiring connectors on both ends of the harness for corrosion or looseness
- Verify power is reaching the motor when the switch is pressed — if voltage leaves the switch but doesn't reach the motor, the fault is in the harness downstream
- Test the manual override drive on the stabilizer to confirm the jack itself is free before condemning the electrical side
⭐ Installation
- Disconnect 12V DC power to the stabilizer circuit before touching any wiring
- Remove the old switch and transfer the harness connections to the new one
- Mount in the existing switch cutout (hardware not included — reuse existing)
- Restore power and test extend/retract operation
1-Year Warranty with The RV Surplus
Specifications
- Brand: Lippert
- Part Number: 387874
- Also Known As: AT141-121
- Supersedes: 242409, 344484
- Type: Electric stabilizer extend/retract rocker switch
- Waterproof Rating: IP66
- Includes: Switch + wiring harness
- Not Included: Installation hardware
- UPC: 848150058126
- OEM Cross-References: Heartland 0270491, Jayco 0237679, Keystone RV 490960, Winnebago 201431-01-000
- Shipping Dimensions: 4" L × 3" W × 3" H
- Shipping Weight: 0.54 lbs
- Country of Origin: China
- Warranty: 1 year with The RV Surplus
