SUBURBAN 15.1 LTR GAS / ELEC Hot Water Heater SW4DEA 240V Element

Features :

The Suburban SW4DEA features a steel tank with porcelain lining. Replaceable anode rod for corrosion protection.

All Suburban RV Hot Water Systems have a porcelain-lined, high tensile steel tank which are pressure tested twice for assurance of tank integrity and a long life.

All Suburban RV Hot Water Systems have an anode rod which absorbs all the corrosive action of hot water. It is located on the bottom of HWS under the main burner, you simply unscrew this to drain the tank of water. If the rod is mostly eaten away, simply replace it with a new one.

• Easy access, Foam tank insulation and high recovery rate.
• Direct Spark ignition for gas and an Electric Element.

Specifications

• 15.1 liter capacity
• Dimensions H320mm x W320mm x ( D450mm plus pipe connections at rear)
  
• Recovery = 35 min. on gas

• Cold water inlet is 1/2 inch female NPT.
• Hot water outlet is 1/2 inch female NPT.
• Anode Thread is 3/4 inch female NPT.
• 240 volt – 50 HZ AC, 1440 watts – 6 amp for Electrical

Please note this is a 240V unit. It's not typically used in the US.