Suburban Water Heater 240 Volt HWS 26.4L (SW7EA) WaterMark Certified 7 Gallon
Suburban Water Heater 240 Volt HWS 26.4L (SW7EA) WaterMark Certified 7 Gallon
The new line of WaterMark certified Suburban water heaters are the same great product you know and trust. Their high recovery gas and gas electric models come in sizes and with the features to match the requirements of almost any RV! Compliant with all required regulations, the new range of Suburban Water Heaters carry the following approvals. WaterMark Certification, Regulatory Compliance Mark and Australia and New Zealand Gas Safety Certification.
The Suburban HWS range all have porcelain lined, high tensile steel tanks, which are pressure tested twice assuring tank integrity and life.
There are a number of gas and gas-electric models available to suit most hot water requirements while travelling. The automatic models feature direct spark ignition with a remote switch for on/off control from inside the RV. Gas consumption is also kept to a minimum, making Suburban an economical choice.
This Suburban operates on 240V only. It is typically not used in the US.
Specifications
Capacity: 26.4Ltr
Max working pressure: 850Kpa
Type of heating medium: 240Volt
Recovery: 21Lt/hr 45ºC rise
Electrical
- For models with 240V heating element: 240Volt – 50HZ AC
- Element rating: 1440 Watts – 6 Amp
Dimensions: W x D x H - 370mm x 500mm x 370mm
- Location of hot water inlet is 70mm from top dead center
- Location of cold water inlet is 55mm from bottom dead center
All Suburban RV hot water systems have an anode rod which absorbs all the corrosive action of hot water, be aware that some imitation anode rods can cause damage to your Suburban HWS. When it comes time to change your anode use a genuine Suburban anode rod (SKU 950-01140) that contains the correct length & thread ( 3/4" NPT) to avoid any damage.