Dometic WeatherPro RV Awning Drive Motor | 3307923.115U | RH | Black

Restore reliable awning operation to your Dometic WeatherPro or Power Patio RV awning with the Dometic WeatherPro / Power Patio Right-Hand Drive Motor Assembly (Part #3307923.115U). This genuine Dometic OEM motor assembly is the drive component that powers your awning's automated extension and retraction — the critical part to replace when your existing motor has failed, become noisy, or stopped operating reliably.

⚠️ For WeatherPro and Power Patio Awnings — NOT for 9100 Series

This drive motor is specifically for:

• Dometic WeatherPro Awnings
• Dometic Power Patio Awnings

This motor is NOT compatible with Dometic 9100 Series Awnings. The 9100 Series uses a different drive motor — if your awning is a 9100, see Dometic 9100 Power Patio RV Awning Motor (Black) instead. The two motor types are NOT interchangeable.

⚠️ Right-Hand Service Variant

This is the Right-Hand (RH) drive motor — it installs on the right side of the awning (as you face the awning from outside the RV). Awnings have separate left-hand and right-hand drive motors; ordering the wrong side will not work in your installation. Verify which side of your awning needs the replacement motor before ordering.

What This Motor Does

The drive motor assembly is the powered component that automates awning operation:

• Drives extension — opens the awning out from the RV
• Drives retraction — pulls the awning back to the closed position
• Provides controlled motion rather than free-fall on retraction
• Allows one-touch operation from the awning's control interface

When the drive motor fails, common symptoms include the awning not extending or retracting at all, partial operation (works one direction but not the other), unusual noises during operation, or slow/strained motor movement.

Cross-Reference: Replaces 3307923.015U

The 3307923.115U is the direct replacement for the earlier Dometic 3307923.015U motor assembly. If your existing motor shows that part number, this is the current production successor — same fitment, same right-hand application.

Common Failure Symptoms

Reasons to replace the awning drive motor include:

• Awning won't extend or retract when the switch is activated
• Motor runs but awning doesn't move — internal mechanism failure
• Unusual grinding, squealing, or rumbling noises during operation
• Slow, labored, or strained motion during extension/retraction
• Motor seizes — completely stops working
• Intermittent operation — works sometimes, doesn't other times
• Awning binds or sticks mid-cycle

Includes Riveting Instructions

The 3307923.115U motor assembly ships with installation instructions including riveting guidance — important since awning drive motor installation typically involves rivet-attached components rather than threaded fasteners. The included instructions walk through the proper installation steps.

Genuine Dometic OEM Replacement

As a Dometic factory replacement part, the 3307923.115U is built to original specifications for a precise drop-in fit on compatible WeatherPro and Power Patio awning installations.

⚠️ Professional Installation Recommended

Awning drive motor replacement involves working with high-tension awning components, rivet hardware, and the awning's electrical system. Awnings under tension can cause injury during disassembly. Installation should be performed by a qualified RV service technician with experience working on tensioned awning assemblies.

Key Features

• Genuine Dometic OEM awning drive motor assembly
• For WeatherPro and Power Patio awnings
• NOT compatible with Dometic 9100 Series awnings
• Right-Hand (RH) variant
• Black finish
• Includes riveting installation instructions
• Direct replacement for Dometic 3307923.015U
• Overall length: 13-7/8"
• Weight: 10 lbs

Specifications

• Brand: Dometic
• MFG Part Number: 3307923.115U
• Replaces: Dometic 3307923.015U
• Type: Awning Drive Motor Assembly
• Side: Right-Hand (RH)
• Application: Dometic WeatherPro and Power Patio awnings
• NOT Compatible With: Dometic 9100 Series awnings (use the 9100-specific motor instead)
• Color: Black
• Overall Length: 13-7/8"
• Weight: 10 lbs
• Includes: Motor assembly + riveting installation instructions