Lippert Schwintek Slide-Out Motor | 287298 | High Torque | 500:1

Restore reliable slide-out operation to your heavier-duty Lippert Schwintek In-Wall RV slide-out system with the Lippert OEM Schwintek In-Wall High Torque Motor (Part #287298, 500:1). This genuine LCI/Lippert OEM motor is the high-torque drive component engineered for Schwintek slide-outs that need more pulling power than the standard 300:1 motor provides — heavier slide-outs, furniture-loaded slides, or installations where binding has caused standard-torque motors to struggle.

⚠️ Genuine LCI/Lippert OEM — NOT a Chinese Copy

One thing worth being explicit about: this is a genuine Lippert motor with an LCI serial number — not a Chinese aftermarket copy. The RV parts market is unfortunately flooded with cheap replicas of OEM Schwintek slide-out motors that often fail prematurely, don't drive properly, or damage your slide-out hardware over time. The 287298 motors we sell are real LCI/Lippert units. If your previous "replacement" motor failed quickly, the OEM vs aftermarket distinction is likely a meaningful factor.

About These Motors — New OEM, Pulled from Disassembled Slides

These motors are genuine LCI/Lippert units with an unusual sourcing path that translates to meaningful cost savings:

• Never installed in customer-sold RVs
• Pulled from disassembled slides that were OEM manufacturing mistakes or bulk inventory
• OEM offloaded these units at auction rather than sending them to customers
• We part those slides out for resale of the individual components

You get genuine OEM Lippert factory quality at a price point typically below sourcing new-in-box motors directly from the supply chain.

⚠️ Possible Minor Wear / Cylinder Discoloration

Because these motors come from disassembled slides, the units may show minor wear or discoloration on part of the cylinder. This is purely cosmetic and does NOT affect:

• Motor performance or function
• Mechanical operation
• Service life
• Mounting fit

The mechanical and electrical components are unaffected — only visible cosmetic finish may show some wear. Since the motor is hidden inside the wall in typical Schwintek installations, cosmetic appearance is a non-issue for most buyers.

500:1 Gear Ratio — High Torque Output

The 287298 features a 500:1 gear ratio — significantly higher torque output than the standard 300:1 Schwintek motor. The higher gear reduction means:

• More mechanical advantage at the drive shaft
• More pulling power for heavier loads
• Better performance when binding or resistance is present
• Reduced strain on the motor under heavy load conditions
• Longer service life in heavy-duty applications

When to Choose 500:1 Over Standard 300:1

Common reasons to upgrade to the high-torque 500:1 variant:

• Heavier slide-out — larger slides with more weight to move
• Furniture-loaded slides — couches, dinettes, beds that add substantial weight
• Repeated standard-motor failures from binding or overload
• Original equipment used 500:1 — match the original motor specification
• Aging slide mechanism with increased friction — extra torque overcomes wear-related resistance
• Manufacturer-spec high-torque application per the slide-out's design documentation

Need the Standard 300:1 Torque Version Instead?

If your slide-out is a standard weight installation that originally shipped with a standard-torque motor, you may not need this high-torque variant — the matching standard-torque replacement is the Lippert Schwintek 300:1 IG-42 10mm Motor (Part #236575) — same Schwintek In-Wall architecture, but with the standard 300:1 gear ratio. Match the motor's torque rating to your original specification or your slide-out's weight requirements.

Always verify against your original motor's part number or the slide-out manufacturer's specification when choosing between torque ratings — slide-out manufacturers specify the appropriate motor at design time, and replacements should match.

In-Wall Compact Design

The 287298 retains the standard Schwintek In-Wall compact form factor:

• Direct drop-in replacement for the standard motor — no architectural modifications needed
• Same mounting interface as standard 300:1 Schwintek motors
• Compact size fits within the standard In-Wall mounting envelope
• Hidden installation — typical Schwintek installations conceal the motor inside the slide wall

For Lippert Schwintek In-Wall Slide-Out Systems

The 287298 is specifically designed for Lippert Schwintek In-Wall slide-out systems — the architecture where drive motors and rack-and-pinion mechanism are concealed inside the slide-out walls. This is distinct from other Lippert slide-out architectures, such as Full Wall slide-out controllers like the 368828, which serves a different system entirely.

Verify your slide-out architecture before ordering — Lippert produces multiple slide-out systems, and motors are not interchangeable across the different architectures.

Easy Installation

The 287298 is engineered for straightforward replacement:

• Direct drop-in fit on compatible Schwintek In-Wall installations
• Standard mounting interface — no architectural modifications
• Plug-and-play electrical connection on standard Schwintek wiring
• DIY-friendly for owners comfortable with basic RV mechanical work

What This Motor Does

The drive motor is the powered component that operates Schwintek In-Wall slide-outs:

• Drives slide extension — opens the slide-out from the wall
• Drives slide retraction — pulls the slide back to the closed position
• Provides controlled motion via the integrated gear reduction
• Delivers high torque output for heavier slide-out applications
• Allows one-touch operation from the slide-out control switch

Common Failure Symptoms

Reasons to replace the Schwintek slide-out motor include:

• Slide won't extend or retract when the switch is activated
• Motor runs but slide doesn't move — internal gear failure
• Unusual grinding, squealing, or rumbling noises during operation
• Slow, labored, or strained motion during extension/retraction
• Motor seizes — completely stops working
• Intermittent operation — works sometimes, doesn't other times
• Motor overheats during operation
• Standard motor was undersized — upgrade to high-torque for adequate performance

Before assuming the motor has failed, rule out simpler issues — switch operation, wiring connections, control module function, battery voltage, fuses, or mechanical binding in the slide-out hardware. These can mimic motor failure symptoms. Our RV Slide-Out Moves Slowly or Stuck troubleshooting guide walks through the typical diagnostic path.

⚠️ Professional Installation Recommended for Complex Cases

While the 287298 is engineered for direct replacement, slide-out motor replacement involves working with the slide-out mechanism, 12V DC electrical wiring, and potentially the slide rack-and-pinion drive system. For first-time installations or unfamiliar slide-out configurations, a qualified RV service technician can ensure proper alignment, electrical termination, and operational verification. After installation, verify smooth extension/retraction across the full slide travel.

1-Year RV Surplus Warranty

The 287298 is backed by our 1-year warranty with The RV Surplus.

Genuine LCI / Lippert OEM

As a genuine LCI (Lippert Components Inc.) factory replacement motor with verifiable LCI serial number, the 287298 delivers OEM-grade engineering and quality. Lippert is the proven manufacturer of Schwintek slide-out systems — these are the same high-torque motors that originally shipped in heavier-duty Schwintek installations.

Key Features

• Genuine LCI / Lippert OEM Schwintek In-Wall high-torque slide-out motor with verifiable LCI serial number
• NOT a Chinese aftermarket copy
• 500:1 gear ratio — high torque output for heavier-duty applications
• In-wall compact design — direct drop-in fit on standard Schwintek mounting
• Heavy-duty performance — engineered for heavier slide-outs and demanding applications
• Smooth and durable operation
• Easy installation
• Standard-torque sibling available: 300:1 variant (Part #236575) for typical slide-out applications
• Pulled from disassembled OEM mistake/bulk inventory slides — never sold to a customer
• May show minor cosmetic cylinder wear/discoloration — does not affect function or service life
• Backed by 1-year RV Surplus warranty

Specifications

• Brand: Lippert (LCI)
• Part Number: 287298
• Type: Schwintek In-Wall High-Torque Slide-Out Motor
• Gear Ratio: 500:1 (high torque)
• Compatible System: Lippert Schwintek In-Wall slide-out architecture
• NOT Compatible With: Other Lippert slide-out architectures (e.g., Full Wall slide-outs use different motors and controllers)
• Installation: Direct drop-in replacement on standard Schwintek In-Wall mounting
• Condition: Genuine LCI OEM (pulled from disassembled OEM mistake/bulk inventory slides; may show minor cosmetic cylinder wear/discoloration)
• Standard-Torque Sibling: Lippert Schwintek In-Wall 300:1 IG-42 10mm Motor (Part #236575)
• Warranty: 1-year RV Surplus warranty