Lippert OneControl Unity X1 Control Board | 801171 | OEM

Replace or upgrade your OneControl X1 control board with the Lippert OneControl Unity X1 Control Board Assembly (SKU 801171). Brand-new replacement sourced directly from Lippert, built to factory specifications. Highly configurable multi-function control board with 16 inputs, 9 output channels, and Bluetooth smartphone app support.

Different Board Version?

The Unity family also includes:

• Unity X0 (801172) — multi-function controller
• Unity X2 (773597 / MPN 24608)

Verify your existing board variant before ordering — they are NOT interchangeable.

What This Board Does

The Unity X1 is a highly configurable multi-function control board for the OneControl system. It manages RV features through a combination of smartphone app control (Bluetooth) and optional OneControl Touch Panel (OCTP) integration via CAN bus.

Bluetooth App Control + Optional Touch Panel

• Primary control: Phone app via Bluetooth
• Optional integration: Tie into an existing OneControl Touch Panel (OCTP) via CAN bus harness
• Cloud capabilities supported (configurable per output)

Extensive I/O Configuration

The X1 board supports a substantial number of configurable inputs and outputs:

• 16 configurable inputs — for switches, DSI fault sensing, and reverse/latching outputs
• 4 Low Current (5A max) latching outputs — +12V outputs for standard devices
• 2 Low Current reversing outputs — extend/retract control for smaller loads
• 3 High Current reversing outputs — for slides, awnings, or high-draw actuators

⭐ In-Transit Safety Lockout

Built-in lockout input allows in-transit lockout of moving features — connects to the brake light or turn signal wire on towables to prevent slide-outs, awnings, or other motorized features from operating during travel.

Programming Flexibility

Per-output configuration options include:

• Ignition Operation Mode — Always or Ignition On only
• Park Brake Operation Mode — Always or Park Brake On only
• In-Motion Lockout Level — Operation allowed / not allowed / retract only
• Switch Type — Toggle or Momentary
• Minimum Operating Voltage — 10.0V through 13.5V options
• Device Activation Timeout — 1 minute to 1 hour, or disabled
• Fuse Type configurable per output
• DSI Fault Input assignable to any input (for gas water heaters)

⚠️ Requires X Series Configurator for Programming

Programming the X1 board's inputs, outputs, and configuration requires the X Series Configurator kit (OneControl Touch Panel with power cord, CAN harness, and power/ground connections). Configurations can be saved to a thumb drive (1-16 GB) and loaded onto additional controllers for fleet replication.

Installation Requirements

• 12V power from a 30A circuit at the power converter (or converter side of battery disconnect with 30A mini breaker in line)
• Watertight installation location required
• 4× #8 × 1" screws for mounting
• Terminating resistor required if no other CAN modules are connected
• Follow RVIA guidelines for wire gauge and fusing

Reference Documentation

Lippert OneControl X1 Control Board OEM Installation Manual (PDF)

⭐ In-Hand — No Direct-Ship Delay

Units are in-stock and ready to ship — NO Lippert direct-ship lead time applies to this listing.

⚠️ Professional Installation Required

Installation involves 12V DC electrical wiring at 30A, CAN bus integration, and X Series Configurator programming. Installation should be performed by a qualified RV service technician familiar with OneControl systems and the X Series Configurator tool.

1-Year Manufacturer Warranty

Genuine Lippert OEM

Key Features

• Genuine Lippert (LCI) OEM OneControl Unity X1 Control Board Assembly
• SKU: 801171
• Brand-new replacement — factory-spec fit
• Bluetooth smartphone app control
• Optional OCTP integration via CAN bus
• 16 configurable inputs
• 4 Low Current (5A) latching outputs
• 2 Low Current reversing outputs
• 3 High Current reversing outputs
• In-transit safety lockout (brake/turn signal wire input)
• Cloud capabilities supported
• Configurable ignition, park brake, in-motion lockout modes per output
• Requires X Series Configurator for programming
• 12V DC, 30A circuit required
• Watertight installation required
• In-hand, no Lippert direct-ship delay
• Backed by 1-year manufacturer warranty

Specifications

• Brand: Lippert (LCI)
• Series: OneControl Unity
• SKU: 801171
• Type: Unity X1 Multi-Function Control Board Assembly
• Primary Control: Bluetooth smartphone app
• Optional Control: OneControl Touch Panel (OCTP) via CAN bus
• Configurable Inputs: 16
• Low Current Latching Outputs: 4 (+12V, 5A max each)
• Low Current Reversing Outputs: 2
• High Current Reversing Outputs: 3
• In-Transit Lockout: Yes (brake light/turn signal wire input)
• Cloud Capabilities: Yes (per-output configurable)
• Voltage: 12V DC
• Circuit Requirement: 30A
• Programming Tool Required: X Series Configurator kit
• Configuration Storage: Thumb drive (1-16 GB) — save/load between controllers
• Installation Requirement: Watertight location
• Mounting: 4× #8 × 1" screws
• CAN Bus: Yes (terminating resistor required if no other modules)
• Condition: New
• Shipping: In-stock (no Lippert direct-ship delay)
• Warranty: 1-year manufacturer warranty