EQ Systems
EQ Systems Slide-Out Hydraulic Cylinders | 9 Variants | RV Slide Room Replacement
EQ Systems Slide-Out Hydraulic Cylinders | 9 Variants | RV Slide Room Replacement
Couldn't load pickup availability
Replace a hydraulic cylinder in your RV's slide-out room with an EQ Systems Slide-Out Cylinder — available in 9 bore/stroke configurations to match virtually any EQ Systems slide-out system. Some builds are OEM-specific (Four Winds, Forest River Diesel), so measure the existing cylinder's bore, stroke and body length before ordering. Available at The RV Surplus.
Fitment critical: Verify cylinder against the identification chart. Call EQ Systems at 800-846-9659.
⭐ Before You Replace a Slide Cylinder
A slide room that extends on its own from the stowed position is usually NOT a failed cylinder. It indicates a loss of pressure in the common retract circuit, and the leading cause is trapped air. Bleed the system and run the hose routing test in the troubleshooting guide below before condemning a cylinder.
Some slide cylinders are fitted with an anti-creep valve (Part 2404) at the rod end — check for this before diagnosing.
⭐ Cylinder Identification Chart
Descriptions read bore × stroke, so 1⅜ × 24 = 1⅜" bore with 24" stroke. Body length is measured on the cylinder body, not including the rod. Several current cylinders replace an earlier smaller-bore version — an older coach may have a 1⅛" bore cylinder where the current part is 1⅜".
| Part | Bore × Stroke | Body Length | Notes |
|---|---|---|---|
| 2162 | 1⅜ × 18 | 24" | Originally 1⅛" bore |
| 1760EQ | 1⅜ × 20 | 26" | Originally 1⅛" bore |
| 2453 | 1⅜ × 24 | 30" | Replaces earlier 1461 (1⅛" bore) |
| 2453AEQ | 1⅜ × 24 | — | Not in ID chart. Two different 1⅜ × 24 cylinders exist — call EQ Systems at 800-846-9659 |
| 2367 | 1½ × 24 | 29¹¹⁄₁₆" | Forest River Diesel kitchen slides only, side-mount cylinder |
| 1762 | 1⅜ × 30 | 36" | Originally 1⅛" bore |
| 2368EQ | 1⅜ × 32 | 37⅞" (extended rod) | Forest River Diesel only. Early versions were 1½" bore |
| 2314 | 1⅜ × 36 | 41¹³⁄₁₆" | Replaces earlier 1763 |
| 2218EQ | 1⅜ × 38 | — | Not in ID chart — call EQ Systems at 800-846-9659 to confirm fitment |
| 1549 | 1⅜ × 42 | 48¹⁄₁₆" | Originally 1⅛" bore |
| 2227 | 1⅛ × 19¾ | 23¾" | Four Winds bed slides only. Cap-end port is in the end of the cylinder |
⭐ OEM-Specific Cylinders
Some cylinders were built for specific OEMs only:
- Forest River Diesel: 2367 (side-mount kitchen slides), 2368EQ (extended rod)
- Four Winds: 2227 (bed slides, end-port design)
Documents
- Slide Cylinder Identification Chart (PDF)
- Slide-Out Drifting Troubleshooting Guide (PDF)
- Required Maintenance Items for EQ Hydraulic Jacks & Slide Systems (PDF)
Related Slide-Out Parts
- Anti-Creep Valve #2404 — fitted to some slide cylinders at the rod end
- Electric Slide Drive and Gear #70314
- Bed Slide Gear and Pin #70338
90-Day Warranty
Backed by EQ Systems' 90-day replacement part warranty. Check documentation for full terms.
Specifications
- Brand: EQ Systems
- Type: Slide-Out Room Hydraulic Cylinder
- Available Configurations: 9 (bore × stroke variants — see identification chart)
- Bore Options: 1⅛", 1⅜", 1½"
- Stroke Range: 18" to 42"
- Warranty: 90-day replacement part warranty
